공지사항

Double Glazing Repair

Double glazing is a popular choice for home owners as it reduces energy consumption and increases security levels. Sometimes, however, issues can arise that need to be addressed as fast as possible.

It is possible to fix double glazing yourself, but you'll require specific tools, and it's recommended to leave the job to professionals. This ensures that the job is done correctly and you get the latest guarantee.

Misting

This is a typical issue with double-glazed windows. It is not only unsightly but can also affect your view as well as the energy efficiency of your home. If your windows appear to be misty it means that the seals in between the glass panes don't perform as they should and moisture could get inside.

This moisture will result in condensation, which will make the glass appear foggy. It can also damage the window's insulation properties since cold air will leak into the window and warm air will escape, resulting in more costly bills.

The most common cause is when the seals inside the window uPVC break down and allow moisture into. This can be due to many reasons, including a mis-fitting window or a window that is flexing or simply aging. The majority of good double glazing is covered by an insurance policy against this, so if they were installed recently you might be able to get them replaced or repaired.

To avoid this problem to avoid this issue, make sure that your home is equipped with ventilation, particularly during the winter months. A hairdryer can be utilized to quickly and effectively defog double glazing. Be careful not to heat the gaskets or seals, which will cause them to melt.

It is also essential to make sure your windows aren't covered by dirt or dust, which can build up and block the vents. If you frequently use the bathroom or kitchen you should keep them open to ensure that steam is able to escape, this will stop it from creating a mess on the windows. It is also a good idea to avoid hanging things such as towels in the bathroom or pans on radiators as these can be a source of condensation.

It is possible to repair your double glazing if it is misty. The method you choose to use will depend on the firm you select. One approach is to drill the sealed unit a tiny hole and then injecting or pumping in a desiccant. This will absorb the moisture. The company can then place vents into the holes to allow airflow, thus reducing the possibility of condensation occurring in the future.

Condensation

Condensation in the glass panes is the most obvious indication of double-glazed windows which need to be repaired. It is evident as drops of water or fog in the space between the two panes and is not just ugly but also affects the efficiency of your double-glazed windows too. One of the main advantages of modern double glazing is that it prevents the heat from entering your home. Instead, it creates insulation by capturing an air-filled space between the two layers of glass. This means that the space between your window panes should be air tight and contain an insulating gas, such as argon. Moisture in this gap means that your window seal isn't working.

It is not uncommon to see condensation on the outside of your window when it rains or misty in humid weather, like a heavy dew in the morning but it should only happen for short periods of time and can be cleaned up quickly with a cloth or a sponge. If the condensation is located in the middle, it can be a more serious problem and your window could have lost its seal.

It could be due to ageing or a fault in the seal itself which is typically caused by a temperature change as this causes moisture to build up on the inside and outer surfaces of your window. It can also happen when the frame of your window moves in a slight manner, or the wrapping that cushions the sheets of glass gets compacted.

It is crucial to seek out the advice of an expert If your double-glazed windows have been misted. There are DIY kits for windows that are misted that you can purchase, however these are not always the best solution and often involve drilling directly into the glass. A reputable company offering double glazing repairs can give you advice and give you a price.

A reputable double-glazing repair professional will remove the damaged pane of glass from the frame, before piping hot air into the gap to dry it out, then a new seal is applied. They can also give you suggestions on how to avoid condensation in the future, for instance, installing trickle ventilation in your windows and doorways which allows fresh air to enter without letting warm air escape. This will prevent moisture from forming on cold surfaces.

Gasket Seals

The gasket seal plays an essential role in any weatherproof window, or industrial door maintenance. It creates a barrier between the opening sash of the window and its outside frame when it is compressed. This stops water and draughts ingress, which can be uncomfortable and destructive. Gasket seals are used to seal double-glazed windows and doors. Gasket seals can be weakened or disappear over time. If this happens, it's best to replace them quickly to avoid long-term damage.

Fogging is among the most frequently observed signs of a failing seal. Foggy windows are difficult to clean since the water that gets trapped between the various panes of glass are not easily dispersed. Seals that fail can cause condensation and stains, particularly on the outside of the window. You should contact a double-glazing repair service if you spot any of these issues.

There are a few ways to repair window seals but the cost and efficiency of this option must be considered. Although it's more expensive to have your seals repaired by professionals and last for longer, they will last longer and last longer. A uPVC specialist can help you choose the right product for your home.

While some opt to simply leave the window seal that's failed, this is not recommended as it can lead to material increases in your energy bills as well as more windows becoming fogged. Additionally, the crack in the seal will continue to deteriorate by itself, so it is best to have it fixed as soon as possible.

Luckily, there are some steps you can take to ensure that your window seals aren't damaged from breaking. It's best to avoid power-washing your windows or patio doors, because this can create pressure on seals. It is also beneficial to get your windows and doors installed by a professional to ensure they're installed correctly. This will reduce the risk of issues like a bad installation or warping of the frames, which can add to the strain on window seals.

Frames

Double glazing is durable and tough, but just like all other windows, it could develop problems with time. Fortunately, a lot of these issues are repaired, which will save you the expense of replacing the whole window. Misting, condensation and sagged or difficult to open frames are a few of the problems that can be fixed by professional double glazing repair.

No matter if you have PVCu windows, aluminium doors windows or wood ones, they can all benefit from targeted maintenance. This can help keep moisture out of the window, which can cause rot. Repairs can be costly. Regular inspection and cleaning can keep water out crucial joints, especially the lower areas of cills or jambs where deterioration is most common.

A quick wipe with a damp cloth can aid in reducing condensation between the panes of glass. You can also use a dehumidifier or keep a trickle-vent open in the room. These measures will help improve the air quality in a home and can also prevent the need for expensive double glazing replacement windows.

The type of frame will affect the cost of double glazing repairs, as different materials need different solutions to deal with condensation. For example, a wooden window is easier to repair than an aluminum or PVCu one since it is usually treated with wood preservatives, whilst metal requires a more comprehensive procedure using specialized paints and misty fillers.

If you find that your double-glazed doors or windows are difficult to open due to the varying temperatures, it could be because the frame is expanding and contracting, causing stiffness. If this is the situation, you may be able to try cooling the frames or lubricating them (especially when they are sliding windows). If the issue persists and your double-glazed window appears to be losing its effectiveness it may be time to think about replacing it.