공지사항

Double Glazing Repair

Double glazing is a favorite among homeowners because it reduces energy consumption and increases security. Occasionally, however, problems can arise that need to be addressed as fast as is possible.

It is possible to repair double glazing yourself, however you'll need specific tools and it's best to leave the work to the experts. This ensures that the job is carried out properly and you will receive an updated warranty.

Misting

This is a common problem with double-glazed windows. It is not only unsightly but can also affect your view and the energy efficiency of your house. If your windows are hazy it means that the seals in between the glass panes don't work properly and moisture can get inside.

The moisture can cause condensation, which can make the glass appear foggy. It can also damage the insulation properties of your window as cold air leaks in and warm air will escape out resulting in higher energy bills.

The main cause of this is when the seals in your uPVC window break down and allow moisture to get into. This can happen due to a variety of reasons including mis-fitting, flexing or even just old age. The good thing is that the majority of decent double glazing comes with a warranty against this so if you have recently had them fitted, it is likely that you'll be able to have the repair or replacement.

You can prevent this issue from occurring by making sure you have ample ventilation inside your home, especially during the winter months, to avoid excess humidity. Using a hairdryer to evaporate the surface condensation can be an efficient and quick method to help defog your double glazing in glazing. Be sure not to overheat the seals or gaskets which could cause them to melt.

You should also make sure that your windows are free of dust and dirt which could build up and block the vents. You should leave the bathroom and kitchen windows open when you use them frequently. This will allow excessive steam to escape and prevent condensation from developing. It is also an excellent idea to avoid hanging things such as towels in the bathroom, or pots on radiators since they can create condensation.

It is possible to repair your double glazing if it has turned blurred. The method used will depend on the firm you select. One method involves drilling a small hole into the sealed unit, and then pumping or injecting desiccant in order to absorb the moisture. The company could then put vents into the holes which will allow airflow and reduce the likelihood of condensation forming.

Condensation

Condensation in the glass panes is the most obvious sign of double-glazed windows that require to be fixed. This can be seen as water droplets or fog between the two glass panes. It's not just ugly, but it also affects the effectiveness of double glazed windows. One of the main benefits of modern double glazing is that it stops heat from leaving your home and instead it insulates by trapping an air-filled space between the two glass layers. This means that the space between the window panes must be air tight and only contain an insulating gas such as the gas argon. In this case, moisture indicates that your window seal is failing.

It is not uncommon to get condensation in the exterior of your window when it rains or in humid weather such as an intense morning dew but it should only occur for brief periods of time and can be cleaned easily with a cloth or a sponge. If the condensation is in the middle, it can be a more serious problem and your window might have broken its seal.

This could be due to an aging process or a problem with the seal. The majority of the time it is caused by changes in temperature that causes moisture to build up on both the inside and outside surface of your windows. It can also happen when the frame of your window is moved slightly or the particular packaging that protects the glass sheets becomes compacted which causes the seal to break.

It is important to consult a professional when your double-glazed windows are misted. There are DIY kits for windows with misting that can be purchased but they aren't always the best solution and typically involve drilling directly into your glass. A reliable double glazing repair service can assist you and offer you an estimate for the work that needs to be carried out.

A reliable double glazing repair expert will typically remove the damaged window pane from the frame prior to the air is piped in to dry out the gap and then a new windows seal is applied. They can also guide you on ways to avoid condensation in the future, such as installing trickle vents in your windows and doors that allow fresh air to be able to enter your rooms without letting the warm air escape, so moisture does not form on cold surfaces.

Gasket Seals

The gasket seal is a crucial component of any weatherproof windows or door, providing an all-important barrier between the opening sash and outer frame when it is compressed. This can stop draughts and water ingress, which can be both unpleasant and destructive. In double glazed windows and doors, special gasket seals of various types are used between the glass panes to ensure they stay securely in place. Gasket seals may shrink or perish with time. If this happens, it's best to replace them as soon as possible to avoid permanent damage.

Fogging is one of the most common symptoms of a leaky seal. Foggy windows are difficult to clean as the moisture that is trapped between the multiple panes of glass are not easily dispersed. In addition, faulty seals can cause condensation and stains, particularly on the outside of the window. It is recommended to contact a double-glazing repair company if you notice any of these problems.

There are several ways that window seals can be repaired, but there is a compromise between efficiency and cost when choosing this option. Although it's more expensive to have your seals professionally repaired by an expert and last for longer, they will last longer and last longer. A uPVC specialist can help you select the best product for your home.

Some people choose to leave a broken window seal in place, however, this isn't recommended. It could lead to a significant increase in your energy costs and cause windows to get more fogged. In addition, the damage to the seal will continue to deteriorate on its own, which is why it is best to have it fixed as soon as you can.

There are a few steps you can follow to avoid your window seals breaking. It is recommended to avoid power washing your windows or doors, because this can put pressure on the seals. It is also recommended that you have your windows and door installed by professionals to ensure they are properly fitted. This will reduce the risk of problems like a poor installation or the frames becoming warped which could increase the stress on the window seals.

Frames

Double glazing is known for its tough and durable properties however, as with all windows it is susceptible to problems over time. Thankfully, a majority of these issues are repaired, avoiding the cost of replacing the entire window. Sagging, condensation, misting or difficult to open frames are just some of the most common issues that can be fixed with professional double glazing repair.

Whatever type of window you have, PVCu windows, aluminium windows or wood windows, they all benefit from targeted maintenance. This will stop moisture ingress which encourages decay and can be expensive to repair. Regular inspection and cleaning will keep water out of crucial joints, especially the lower areas of jambs and cills, where degradation is the most frequent.

A simple wipe with a damp cloth can help reduce condensation between the panes of glass. You can also utilize a dehumidifier or keep a trickle-vent open in the room. These measures will help improve the air quality in an apartment and will reduce the need for costly double glazing replacement.

The type of frame you choose will affect the cost of double glazing repairs, as different materials need different solutions to combat condensation. For double glazing repairs instance, a wooden window will be easier to repair than an aluminium or PVCu model as it is usually treated with wood preservatives, while metal requires a more extensive approach using specialist paint and fillers.

If you find that your double-glazed sliding folding doors or windows are difficult to open due to varying temperatures, this could be due to the frame is expanding and contracting, causing stiffness. If this is the case, it's worth trying to cool the frames down or oiling them (particularly if they are windows made of sash) as this may help. However, if the problem is persistent and your double-glazed window appears to have lost its energy efficiency, it might be worth considering replacement instead.