공지사항

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double glazed window repairs panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers to assist the new pane to fit properly into the frame of the window.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you may think about a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

upvc window repair near me windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. Over time, they can be affected by a variety of issues such as sliding. A sagging uPVC windows could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows to reach the frame. After that, using an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. It is crucial to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. You'll first need to close the window and then perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. Most of the time, Upvc window repair window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be done by any skilled DIYer. Depending on the severity of the problem the old caulking might need to be removed before a new layer can be put on. It is crucial to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason for the reason that your uPVC window is difficult to open, or if it blows open with an ease. Any competent DIYer can replace hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple procedure, but it is easier to do when you have a person to help hold the frame up.

Verify that the uPVC hinges are open and closed in the proper direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused due to opening the window in the wrong way or by a poor installation at the factory. Sending us a photo via our website will often solve the issue. We are happy to offer assistance.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges may also become misaligned due to wear, which can cause gaps where the sash and frame meet. These can be easily fixed by giving them a good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it is possible to just give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next common reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be put on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. If you have any problems with your upvc window it is recommended to speak with a professional immediately.