공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized item from theft. This system is discreet & does not require any additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to create a unique pin code sequence that can be altered up to 20 times. This then authorizes the start-up of your vehicle.

Simple PIN Code Change Process

With the growing rate of vehicle theft, a lot of owners are seeking to improve their security. There are a variety of aftermarket security devices, from tracking systems to alarms and immobilisers. Not all of them are equally effective at protecting your car. A tracking system may assist you in locating your vehicle if it's stolen however, it won't stop the crime. Immobilisers, on the other hand is exactly what is ghost immobiliser says on the tin: it shuts down the engine of your vehicle so that it cannot be started. The autowatch ghost immobiliser cost Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for thieves to take your car.

The ghost device uses the buttons on your car to create a unique sequence which must be entered to allow the engine to begin. This can be done using the indicator stalk or window buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without the button sequence. This option is particularly beneficial if you have to hand your car over for valet parking or servicing since the immobiliser will still be activated, but not disabled.

The Ghost is an unique and innovative device that works by using your vehicle's buttons rather than as a standalone device. It's not just an effective deterrent to theft of your vehicle however, it can also be used on any future vehicles you may own. This makes it a far better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is a sophisticated security system that guards your car from key cloning, hacking & ECU swapping. It's a small weatherproof device that connects with the ECU of your vehicle directly via the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical method used by car thieves to circumvent immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch ghost doesn't produce LEDs, but instead utilizes the buttons inside your vehicle like the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. The sequence can be extended to 20 presses for extra security. The iPhone app allows only one connection, with an individual pairing code for the Ghost. All communication between the two devices is protected.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It can be temporarily operated in valet or service mode (with the appropriate parameters, like a 30mph speed limit) which means you can offer your vehicle to a valet or service without needing to enter a code.

Every vehicle is tested

The Autowatch Ghost is the first aftermarket immobiliser on the CAN bus that is able to be connected to the wiring of your vehicle and connects to your engine control unit (ECU). The device is able to intercept signals and prevent your car from starting up normally until you enter a specific code. The system can be activated and deactivated by using your smartphone's app without the need for wires.

The factory-installed immobilisers function with a transponder which is built into the key. This transmits a signal to the ECU. If the correct code is sent the car will start however, if the transponder is swapped with one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology developed the Ghost immobiliser. It shields your car from hacking, key cloning and even key theft. The only way a thief could steal your car is physically towing it away and even then they would not be allowed to drive it.

Ghost makes use of the buttons on your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels How to become A autowatch Ghost installer generate an unique PIN code that is changeable that must be entered prior to you can drive. This is performed without the need for additional hardware, such as a key-fob and can be up to 20 presses long. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves are unable to make use of sophisticated RF scanning or code-grabbing technology to detect that a security system has been installed.

Unlike physical anti-theft devices like wheel locks or clamps, bmw x6 ghost installer is concealed within the vehicle so it can't be removed or disabled by thieves and is also harder to remove than a car alarm, which requires disarming via an action sequence. This makes it an excellent complement to a GPS tracker which helps locate your car after it's been stolen.

Override of emergency PIN code

You do not have to look too far on social media sites to find stories or even videos of vehicles that were stolen by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle without your original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to stop your vehicle from being taken if it is targeted by thieves. It works by creating a unique pin code push sequence using the buttons you have on the steering wheel, door panel, and centre console. This unique PIN is entered along with your original key fob in order to stop the engine from beginning. The unique PIN for override is on the black card that you will receive following installation. It is simple to remember since there aren't any LEDs.

The device is hidden in the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software that can determine the security system you have installed. This makes it a fantastic alternative to the tracking device.

Contrary to other security systems which use a relay in engine bays, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to shut down a vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm, or tracker with these systems but this must be stated prior to the installation of the device. They are also fully service/valet mode compatible and a great alternative to a tracker you have your car checked for an electrical fault at the dealer.

Service/Valet mode

In recent years there has been a increase in the number of vehicles being stolen with no owner's keys. It's now easier than ever before to steal your pride and joy due to the availability of key cloning tools & door lock picks. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit), via the data loop of CAN. It's completely silent since it doesn't use radio frequency or keys fobs. This means that it can't be detected by diagnostics or other vehicle hacking devices. It also shields against the possibility of adding an additional key or replacing the ECU to bypass the system since only the correct PIN code will allow the engine to start.

The device is hidden in your car and can be accessible via buttons on your steering wheel, centre console, and door panels. A unique & changeable PIN code sequence that can be as long as 20 digits must be entered prior to being able to start your car.

This is the first aftermarket CAN bus immobiliser to be designed to stop your car from being moved away or even started without a PIN code being entered first. If the device is activated and you try to drive off it will display an indication on your dash which will flash continuously for about 300m. If you enter your PIN code at this point, it will deactivate the anti-hijack and your car will continue to operate just as normal. If you don't enter your PIN at this time the indicator will continue to flash and require a new pin code every time you try to start your car.