공지사항

Double Glazing Lock Repairs

The best locks for your windows and doors can stop burglars from entering your home. In general, they don't enjoy breaking glass or trying to wiggle through open windows.

Certain double glazing owners however, have encountered issues with their window or door lock after installing. Fortunately, these issues can be fixed without having to buy new double glazed repairs near me glazing.

Broken or faulty locks

A locksmith can fix your uPVC window or door lock if broken or faulty. They can repair double glazing windows the hinges, striker plates and locks on your double glazing. They can also adjust the cylinder in order to correct any misalignment that may be causing your handle to operate correctly.

The mechanism might be jammed when the key fits into the lock, but it does not turn or is difficult to insert. Grease or dirt can be trapped in the mechanism. If this is the case, it is possible to clean the lock and then lubricate it. It is important to apply a dry lubricant such as graphite or teflon instead of oil which attracts dirt and adhere to the inside of the mechanism. After having lubricated, insert the lock key into the lock and turn it. The lubricant should make through the mechanism and the lock should be able to turn with ease.

A damaged lock can be caused by loose screws inside the mechanism of the lock. They can loosen and fall out or even break off completely, preventing the lock from being able to perform as it should. The screws can be tightened by using a screwdriver, but be careful not to overtighten them. This could damage the internal components.

A faulty lock can be dangerous for both you and your family, particularly if you have young children. It can be easy for them to open the door without you knowing and allow them access to your home. If you're concerned about this happening, then a locksmith who is vetted can provide a quick and efficient service to secure your double-glazed doors.

Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on uPVC doors and windows. We can also reconfigure the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always required.

Handles that are broken or are damaged

Many double-glazed windows have a multi-point lock as part of the overall security package. This is a great choice for those who are concerned about opportunistic thieves looking to gain entry to your home. It is also a good idea to ask your installer about anti-lift locks, these can be fitted on top of the existing locks and help keep your window firmly locked in a closed position.

It's not uncommon for the handles to be damaged or fail. They are the first part of your window that will be pushed open by criminals intent on breaking in. The good news is, this is one of the easiest parts to fix.

Modern uPVC handles and aluminium handles are equipped with a multi-point locking mechanism, referred to as Espagnolette that is designed to ward off forced entry. This security upgrade is available as an option on new uPVC windows. As an alternative upgrade older style aluminium or uPVC handles that are no longer used can be upgraded to shoot bolt locking systems.

When a handle is faulty it's crucial to get it repaired as soon as is possible. Handles that are damaged can prevent the window from closing correctly and letting in a draft. It could also be a weakness that opportunistic burglars might exploit, placing your home and belongings at risk of being stolen.

To repair to double glazed Windows the damaged mechanism, you first need to gain access to the window frame, then take off the broken handle. The gearbox that opens the handle is removed and the type of gear is identified so that a replacement can be found that matches the profile of internal window frame mechanisms.

After the mechanism has been replaced, the handle may be put back together using the original screws. We recommend replacing them with larger screws to ensure a more secure fit. The final stage is to apply a layer of clear sealant to protect the handle from further corrosion. After that the window will be fully operational again, and at only a fraction of the cost of replacing the entire window.

Hinges that are broken or faulty

If your windows do not close properly, you may be experiencing draughts, the weakening of your home's security barrier, and an increased chance of damp or water damage. Broken or damaged window hinges are a typical issue and can be repaired easily.

If you have a uPVC window that won't open or close, it's likely your hinges are broken or damaged and require replacement. A lot of window manufacturers will require that you purchase an entirely new window unit in order to resolve this issue, but we are able to replace the hinges to save you money.

Window hinges are often damaged from repeated use or they could be weakened due to corrosion over time. If you find a broken hinge, it's important to take steps to prevent further damage by being careful not to force the window open or closed.

You can find the right parts for your hinge by identifying the type of hinge it is. The most common types of window hinges are Maco, Mila, Roto and a variety of other brands. Talk to a professional before purchasing parts that will not fit with your existing hardware. This can result in further damage.

A damaged hinge can be a major issue for your uPVC window and doors. They can be the main source of noise, and they can also allow water to enter your windows.

Make sure that the pin barrels on both hinge halves are aligned. If it isn't then tap the head pin with a hammer to make a shallow bend in the hinge barrel. This will help keep the pin in position. Ask a second person to hold the door while you take the hinges and hinges from both the doorjamb and the door. Replace the hinges using those of a matching size and then attach the screws using glue. Finally put the hinges in place using clamps or weights until the glue dries.

After you have repaired the hinges, you can put the door back in place. You could also reattach the handle. Replace the screws with wood dowels of the same size as the original screw to ensure they are in line.

Glass that is Broken or Faulty

uPVC Windows can be damaged over time, even though they are great at keeping cold out and keeping warmth. This can include broken or damaged glass and faulty locks. If neglected, this could turn into a major expense. It also can detract from the aesthetics of your home and can lead to loss of insulation, so it's important to repair any damage as soon as possible.

If the glass is cracked, but not broken it is possible to fix it yourself using the appropriate tools and techniques. First, make sure that the area around the glass is free of debris so that any shards don't cause injury to anyone or are a trip hazard. Then, you must remove any broken pieces and dispose of them appropriately. Then, place masking tape to the entire area to prevent fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a repairing double glazing-paned window, it's best to prepare the glass before gluing it back into place so that you know you'll have enough space to finish the project.

Before applying the glue, clean the surface of the broken frame and glass with a an unclean, dry cloth. Follow the application and curing instructions that may differ from one product to the next. You may need to clamp the glass that has cracked with lightweight clamps designed to support fragile materials, based on the angle.

Once the adhesive has fully set, carefully place the glass into the window frame. Make sure it is aligned with the frame's edge and that there aren't gaps between the glass sash as well as the frame. Be careful not to bend the glass when you reinstall it, as this could weaken the seal. This can lead to water infiltration or condensation.

Get in touch with a professional glazier, such as O'Brien(r) for a replacement if your glass window is completely shattered. It's important to act quickly in the event of broken glass.