공지사항

Replacement Upvc Window Handles

Most replacement upvc windows handles include everything you need. However the handle you had previously was fixed by screws or pins, they will need to removed. Remove the'snap-in' cover at the base of the handle.

Next you will need to determine what kind of broken window replacement and lock your new handle is for This is vital!

Espag

Espag handles are a multipoint lock system that can be used to secure casement windows, such as uPVC and wooden double glazing. The handle is fitted with a 7mm square shaft that fits into a gearbox on the uPVC window glass replacement. When the handle is turned, it triggers a series of locks around the window's perimeter. Espag handles, also referred as shootbolts, give more security than the single point locks found on older frames.

There are many options to choose from that include inline and cranked handles that can be operated by either the left or right hand. You can also find ergonomic handles that improve the look and feel of your window, as well as handles.

You will need to measure the size of the spindle from base of your uPVC handle in order to order the correct replacement. This measurement, referred to as the step height will help you choose the perfect uPVC window handle for your home.

You may need to remove any screws that are protecting the screws that hold the handle in place, and if this is the case, use a screwdriver to remove these or pliers to remove the pins holding the handle. Once you have done this, you will need to take the handle apart by taking off the screws or pins that hold the spindle, and then taking it away from the window.

After you have removed the handle, you can access the locking mechanism inside the frame of the windows and remove the cockspur block that is located next to the handle. This will allow the window to be opened. The new uPVC handles you have ordered should be able to slide onto the cockspur block, and then into the handle spindle, allowing the window to open again. It is recommended to replace the cockspur wedge block a new one whenever you replace your uPVC handle to ensure it is securely secured.

Cockspur

Cockspur handles are found on older uPVC or aluminium windows. The handle turns and closes onto a plastic wedge shaped receiver catch (not to be confused with window latches made from timber which are also handled in this section). These handles are available in lockable and nonlockable models. They are available in different nose heights that can be adjusted to the existing frame.

The handle is secured by small triangle-shaped spur (spur) which is fixed to the frame. These are generally one way handles, however a deadlock lock cylinder that locks can be fitted for additional security.

As with Espag handles, replacement handles for cockspur handles are simple to install all you need is new screws (supplied) and the correct backset. The backset is measured from the baseplate to the nose on the underside of the handle. Aluminium window frames are typically 9mm wide, whereas UPVC is 21mm wide. There are a variety of variations, so it's important to measure before buying the handle.

This type of window handle can be substituted by simply unscrewing the existing handle and removing the spindle, or in some cases the whole handle assembly. The replacement handle is then screwed in place by using a pair of pozidrivs screws. The pozidriv screw is available in a brass or a zinc finish to match the existing hardware. There is also a choice for a self-locking pozidriv screw.

This cockspur handle can be simple to install and is perfect to replace or repair old uPVC Windows. They are an universal design, making them suitable for all profiles and backsets. Each handle comes with 3 packers that vary in thickness, these are neatly fitted to the underside of the handle's nose and can be arranged in different ways to achieve backsets of 9, 13mm, 17mm and 21mm. These handles are available in left and right-handed versions, as well as lockable and nonlockable versions. They are also available in a variety nose heights.

Tilt and Turn

Tilt and turn windows are a coveted European window style that has been around for decades in Europe but is beginning to gain traction in the US. The windows combine the functionality of three window styles - tilt, in-swing, and pivot. They are perfect for older homes because they are more breathable than conventional windows.

When in the closed position tilt and turn windows lock like the normal fixed window. But, by turning the handle 90° or 180@ (depending on the kind of tilt and turn window) the sash can be opened inward and the window will be tilted in order to allow air circulation through the opening at the top of the frame. This is a great method to let air circulate without opening a large windows that could be dangerous.

If the handle is turned a further 90@ or 180@ the sash will be fully opened like a door. This allows complete air exchange, which is particularly useful in rooms that are chilly or homes where odors from smoke or other sources can accumulate. It also makes cleaning the exterior of the glass replacement on windows much simpler since it can be done from inside the home - a job that usually requires ladders that are not safe.

Tilt-and turn windows are also secure. They are very difficult to open when they are locked in the closed position. They also have double seals that keep rainwater out of your home when it is in the tilted position, or in swing. This feature is especially useful for older homes, where burglars tend to target windows which can be opened by the side hinges.

Spade

There are several kinds of window handles that can be installed to double-glazed windows made of upvc. The two most popular types are Espag handles and Cockspur handles, then there's also tilt and turn handles blade or spade handles and monkey tail handles. The kind of handle you pick will depend on your preferences and the type of windows you have.

You need to be aware of how the handle you have currently is attached to the frame in order to select the appropriate replacement Upvc handle. This is known as handing and is an essential piece of information, especially when shopping online, as certain handle variations don't fit all windows. For example, some handles for cockspurs are angled, whilst others are straight and will either turn left or right. You'll also need the size of the spindle that is the distance between the base of the handle and the handle's head.

Another important part of choosing the correct handle is knowing whether your windows need a restrictor or not. They are usually used in high-rise flats or commercial structures, but are not a requirement for homes used by the homeowner. Also, you should take into consideration the step height, which is the distance between the screw plate and the nose of handle.

The word spade is derived from Old English spadu, spaedu or spada. It has been translated into many languages including German spaten and Low German spathen. In the 1920s during the Harlem Renaissance in New York City, spade began to be used as a derogatory term for black people. Since the time spade has been an emblem of African American pride and heritage.

It is crucial to select the right size when replacing a handle that is Cadenza-style. Handles are available in straight and angled versions that differ by a few millimeters. The handle head is available in a variety shapes, including a T or D shape. It can also be left without handles.