공지사항

UPVC Window Handle Replacement

It is easy to replace a broken window glass replacement handle using the appropriate tools. It is important to identify the type of handle and its spindle's length prior buying the replacement glass for windows near me.

Older uPVC window handles have a spur that protrudes and locks over the wedge striker for cockspur. They can be left or right-handed and need to be replaced with the same handle.

What type of lock and handle do I have?

There are a variety of upvc window locks and handles each with its own advantages and purposes. The type of handle you have will determine if your locking mechanism is efficient and if it is easy to open the windows. Over time, and with regular use the upvc handles that are on your windows can be damaged and worn out. This makes them less secure and less effective. In some cases they could even disappear completely. If you find that your window seal replacement handles have fallen off, it's essential to fix them as soon as possible. This will help stop potential burglaries and keep your home safe.

It is a good thing that replacing your upvc window handles is a simple task that is achievable by nearly everyone. You'll need some basic tools, but with right knowledge, it is an easy task that will only take a couple of minutes. It is important to know the type of lock or handle you have on your window. This will allow you to choose the correct replacement.

Inline Espagnolette Handles

They are the most popular type of upvc handle and are usually placed on the side of your window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles come with a spindle that runs through the middle of the handle to the window frame to control the latch.

Cockspur Handles

They are typically found on older uPVC window frames and feature a distinctive, hook-shaped design. Cockspur handles are secured to the window frame by only one screw and are less secure than other kinds of window handle.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles in that they can be rotated for opening the window, and then lowered into the window to allow air circulation. They have a 7mm spindle on the back and are available in right-hand and left-hand versions.

It is essential to know the spindle's size prior to purchasing a new upvc handles. There are a few that are the exact same size. Drop something in the middle of the hole to test the length. This is the maximum size of spindle that will fit your windows.

What is a spindle?

uPVC window handles operate in a similar manner like doors. By turning the handle, you will be able to activate a latch inside the frame. This opens the window so it can be closed and opened. The handles could be damaged, particularly if they're often used or are exposed to harsh conditions. This can lead to the need to replace your uPVC windows handles as they may not be able to operate the window correctly for a long time.

There are a variety of uPVC handles that are available, including Espag, Cockspur and Spaded handles. They are designed to fit inside the uPVC frames in different ways. Each handle uses a specific spindle to lock the mechanism into the window. It is important to identify the type of handle you have installed on your uPVC windows to ensure that you replace it with the correct one.

You can determine the type of uPVC handle you have by taking a look at the base of your handle. A snap-in covers should be over the screw that holds the handle's base in position. Remove this and then you should be able see the second screw on the opposite side of the base portion of the handle. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.

After taking off the uPVC handle, carefully unscrew it from the locking mechanism. Take careful note of the length of the spindle since you will need to ensure that you buy an alternative that is the same length as the original handle and locking mechanism.

The spindle wears down and cannot operate the locking mechanism. This can be caused by corrosion, damage due to frequent use, or an unreliable locking mechanism. If this happens, you will need to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off the handle from the previous one?

Window handles can become damaged or even broken over the course of time. It is important to fix them as quickly as you can to ensure your security. The good news is that replacing a worn or damaged handle is a simple task that can be carried out in less than a minute and doesn't require any specialized tools.

The first step to remove the old handle is to remove the screw situated at the top of the handle base. Once the screw has been removed, the handle can be removed. There is a second screw that is located at the bottom of the handle base, and this can be removed as well. When both screws are removed the handle can be removed from the base section of the window.

After removing the old handle, align the fixing holes of the new handle to the holes that are already in the window frame. If there is a sticker or cap on the new handle, take it off it if necessary and then screw the handle into the appropriate position. It is essential to ensure whether the handle functions after it has been installed. Turn the handle over and make sure the lock mechanism is working.

Espag handles come with a spindle which protrudes out of the handle and slot into the multipoint locking mechanism of the frame of the window. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hang over the frame that surrounds the window or the transom crossmember of the bar.

After you have installed the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) after the handle has been firmly fixed. The handle is now ready for use by opening and closing the window several times to make sure that it functions correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is quite simple. All you need is a screwdriver and a bit of perseverance. The first thing you need to do is ensure that the handle you have previously used is in the unlocked position and then remove any screws that are visible. you can also replace these with screw caps if needed. After the handle has been removed, you need to make an note of the length of the spindle that extends from the back of the handle. This is crucial since it will determine the kind of handle that you will require to purchase.

Espagnolette handles are the most commonly used type of handle used on uPVC windows. The spindle passes through the handle to operate the locking mechanism within the frame of the window. When the handle is turned, it releases the latch on the window and allows it to open. In regular use and over time, handles for espagnolette may be damaged.

Cadenza handles are a different kind of uPVC window handle that is commonly used on tilt and turn windows. They have a protruding blade that operates a multipoint locking mechanism within the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. They can be replaced by the same method as espagnolette handles however you will need to ensure that the new handle has a curved blade instead of one that is flat.

After you have picked the correct handle, simply align the new handle with the existing screw holes prior to fixing it with screws. You should then put the screw covers back on and test that the new handle functions correctly. You can perform this by moving the handle between the locked position to the unlocked one a few time. If you encounter any issues, it could be worthwhile contacting a professional to determine if they can help resolve the problem. They are often able to advise you on the best way to solve the issue in a fast and effective manner.