공지사항

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the frames of the past easily. However If you have double glazed window repairs pane windows that are held in place by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap between the window and the door is substantial, you may prefer an alarm system that has an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of issues, including sliding. A window that is sagging can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try to reposition the hinges. To do this, you'll have to open the window repair near me to get to the frame. Then, using an screwdriver, remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you can't reposition the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also become loose. The majority of the time, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Water leaks from windows are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature in your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or missing.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread across the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in a breeze. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component, hinges can wear out over time. It's easy to change a window repairs near me hinge, but it's easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The problem can be caused either by opening the window improperly or due to a poor installation in the factory. Sending us a picture through our website can often resolve the problem. We are happy to offer assistance.

It is also essential to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges due to wear and tear could become misaligned. This causes gaps to develop between the sash and the frame. If they are damaged beyond repair, it may be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it is feasible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes filled with some kind of filler. They can be placed on top of your windowsill. They will keep your home warm by blocking cold air.

With a little maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. It is important to remember that all windows will eventually wear out and it may be more cost-effective to simply replace them than to repair them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional as soon as possible.