공지사항

How to Properly Start a Wood Burning Stove

Wood stoves are a comfortable way to heat a space and save energy. They require some care.

A majority of modern wood stoves comply with EPA emission guidelines. Look for an EPA sticker under or beside the grate to make sure your stove won't produce lots of harmful pollutants.

How to Start a Wood Fire

The smell and the sound of a woodfire can be an excellent addition to any house. It's crucial to learn the proper way to make a fire on your stove. Improper techniques can result in the fire not burning effectively and produces creosote or smoke. The following tips can aid you in starting an fire that can heat your home with minimal effort and with the highest security.

Check the condition of your coals and logs before you start an fire. If they are too wet, they will smother the fire and prevent it from burning efficiently. You may also want to open the flue to let any ash out that has fallen into the stove.

Begin by placing a handful of small modern wood burning stove, dry pieces of newspaper in your stove. This will help ignite the sparks. When the tinder and the kindling have begun to burn, you can add an additional layer of larger pieces on top. This should be done using a crosshatch design so that there is air between each piece.

If you own a wood stove that has an automatic control of combustion, it will automatically feed an air stream controlled to the fire as it builds. This will allow the fire to burn at a steady pace without the need to open the stove door to keep it in check.

Avoid using too much tinder, as this will cause the fire to burn at a fast rate and not use the multi fuel wood burner efficiently. If you have a solid fire and a bed of tinder in your stove, start the main fire by laying two large logs of the base across the grill. Then, add a layer of smaller logs perpendicular to these and on the top of the base logs. This method of constructing a fire called a "top-down" fire will result in an effective and long-lasting fire that does not overtake the larger base logs.

Once your fire is well established Close the damper and keep it shut. If you open the damper too early, it can cause the fire smother and will not allow for the proper airflow, which will decrease the efficiency of the fire.

Add Wood

Stoves can be used to heat your home efficiently and save you money. They can be used by themselves or together with a furnace or central heating system to provide the extra heat needed in large homes or houses with a lot of rooms. Many of the new stoves that burn clean utilize a superior combustion method that differentiates the burning process of volatile compounds from combustible gases and tar by supplying air in two different stages. The first stage allows for the vaporization of the volatile compounds, while the second step offers fresh air that is pre-heated. This improves combustion and reduces smells.

The amount of heat you get from a stove is contingent upon the species and moisture content of the wood used as well as the size of logs. The logs should be stored in a well-ventilated area for a period of time before you try to burn them, to give the wood a chance to dry out. If the logs are wet they will release lots of steam, which is essentially wasted energy.

You should add wood to the pile in intervals, not all at one time. In addition, adding too much wood at once could cause the temperature to rise in the firebox, causing an air vortex that draws smoke and volatile compounds that have not been burned back into the flames. This could reduce the efficiency of your stove.

It is recommended to stay clear of any other combustibles, such as paper or cardboard in your stove, as they are not wood and have very different physical properties that can't be burned without causing dangerously high temperatures and a lot of emissions. You should not burn combustibles that are compressed, such as wood briquettes as they differ in chemical and physical composition from firewood. They are also not approved to be burned in wood-burning stoves.

It is essential that a professional install and test your wood stove. A certified WETT technician will test the installation for proper operation and safety as well as make sure that your chimney is working correctly. They provide maintenance services for your chimney and stove to ensure they remain in top shape. They can check the areas accessible to your chimney for leakage, and fix any issues found. They will also make sure that the occupants of the house understand and follow the evacuation procedure in the event of an accident.

Adjusting the Damper

A damper controls how much heat is lost to the chimney when you're not using your stove Wood Burning. It can also be used to regulate the fire. If the flue is open but the damper is closed the fire will not ignite properly and smoke will billow into your home. You can adjust the damper to ensure the best flames by experimenting with different locations.

Typically, you should keep the damper open enough to let air in and out of the flue when a fire is burning. This will let the fire start and stay lit for several hours. The proper opening will prevent the fire from starving of air and will keep it from blowing smoke.

To properly adjust your damper, you need to ensure that the fireplace is heated and the wood stove is hot. This will ensure that the chimney is warm and has a good draft. Once these are done the wood stove damper can be adjusted.

Once the fire has burned a bit you should shut the damper down to about three-quarters of its maximum. This will stop warm room air from escaping into the chimney, while allowing the smoke to escape out of the wood burning stoves for sale woodburning stove.

This is the best way to prevent the fire from becoming too hot while still keeping it lit. If you close the damper too tightly, it could stop the draft from working, but when it's too open, a cold wind could enter your home.

You can determine how much the damper is open by holding your hand near the top of the inside of the flue pipe. If you can feel a small contemporary wood burning stove draft pushing against your hand, it's probably in the open position.

The damper's setting can vary a little from one stove to the next and even between different types of wood. Experimenting with the various settings will give you an idea of what you should look for, but you will need to tweak until you get the ideal setting for your stove.

Clean Up

It is important to clean your chimney and stove after an incident. This reduces the chance of a fire in the chimney, which is the primary reason for fires caused by wood stoves. Creosote is a sticky substance that forms on the inside of the stovepipe and can be very dangerous. Unburned and moist particles of wood that are unable to escape the flame are the reason for this substance. It could be caused by improperly lit fires.

A regular cleaning routine helps prevent the buildup of creosote. This can be accomplished by sweeping your chimney at least once every year. It is also recommended that you have your fireplace and stove professionally cleaned and checked at least every year.

It is also recommended to clean the ash tray and grate it regularly. It is recommended to use only wood that is seasoned for burning, as it will create less creosote and less ash. It is also recommended to avoid burning cardboard, paper or plastic items. These materials can release harmful chemicals to the air and flue, that could end up in your home.

It is also essential to wash the glass of the wood burning stove on a regular basis. A lot of modern wood stoves are designed with self-cleaning glass, meaning that they do not require much scrubbing. You can apply stove glass cleaners to the window if you're not capable of getting the glass as clean as you'd like on your wood stove.

Other helpful suggestions for maintaining your wood stove include turning the vent down when you're not using it and slamming a window or door to increase the flow of air. This will keep the fire burning more hot and efficient. The wood stove will not have to work as hard in order to circulate air. It is recommended to not stack logs or leave them in the fire for prolonged periods of time as this can lead to splitting and warping. Finally, it is recommended to avoid using compressed combustible wood logs in your wood stove, because the paraffin in them can melt and flow down the flue which could damage it.