공지사항

Sliding Patio Doors Repair

It is possible for sliding patio doors to become difficult to open and close. This could be due to a range of issues, including dirty tracks or misaligned rollers.

Clean and lubricate your rollers. You can also adjust the rollers using adjustment holes located on the bottom of the door panel that can be moved.

Dirty or Damaged Track

A dirty or damaged track can cause the sliding door to not slide smoothly. Over time, dirt, grit, and even rust may accumulate making the track unable to move smoothly. The solution is to clean the track thoroughly with a brush and mild detergent. This job should be done regularly to ensure smooth operation and prevent expensive repairs in the future.

A door that is leaky is another common problem that requires immediate attention to prevent mold growth, water damage and structural deterioration. The problem is usually caused by worn weather strips and misaligned doors. This can be rectified by replacing the weather stripping and aligning the doors.

Rollers that veer off the track are another common issue that can be fixed with some simple DIY work. This task can be difficult so you may need a helper to help you. To reposition the rollers, stand inside the house and lean one of the panels towards you. When the panel is lifted off the bottom track, you'll need to place it on sawhorses to stop it from falling off. Then, loosen the roller's screws and then pry them out with the screwdriver. You can now clean any dirt that has accumulated between the wheels and the tracks. Clean each wheel using denatured alcohol tilt and slide patio door repairs a rag, then reposition the wheels and attach them to their tracks.

It is possible to straighten bent track sections using a mallet made of rubber and a piece of wood. If the bent section is near hinges or is likely to cause more damage, it's recommended to seek out an expert.

Rollers that are misaligned

If your sliding door has problems with sliding, it's most likely that the rollers are not aligned correctly. The wheels could be dirty or rusted, and their bearings wear down. This creates friction between the bottom of the door and the track, causing it to grind or snag when it's shut or opened. This can also result in noises that squeak.

Fortunately it's a simple fix. The wheels are on a bracket which can be adjusted, which means you don't need to remove the door. Locate the holes for adjustment (usually on the opposite side of the frame) and utilize a screwdriver for turning the screws that control the wheels. A clockwise rotation of the screw raises the wheel while a counterclockwise movement lowers it. Continue adjusting the door until it opens and closes smoothly.

It is essential to adjust the wheels before adjusting the latch. The latch hooks must align with the strike plate (the opening into which the latch locks) to allow the lock to function properly. If you don't do this, the latch could open or close when you're not in the room.

Sliding patio doors are an investment, and making sure they are functioning correctly helps keep your family safe and secure. You can avoid costly repairs by addressing problems that are common, like broken tracks, rollers, and handles. Contact us for more information on patio doors. We can help keep your sliding patio door frame repair doors in top condition by evaluating the repairs needed. Our experts can also help with any replacement parts that you may need.

The door frame is sagging or damaged

Doors for sliding patios are a great addition to any home. They are a practical and attractive alternative to swing-open or hinged doors for patios. Like all hardware items sliding patio doors may be prone to problems over time. A lot of these issues can be fixed by using a bit of DIY skills.

A gap in the frame is a typical problem with sliding patio doors. This can be due to a variety of reasons, including a rollers or tracks that are not aligned properly, a damaged track or door, or a bowing frame for the door. In most cases the root of the issue is easily remedied by removal of the door and reconnecting the track or rolling elements. It is crucial to be cautious not to harm either the frame or the track.

In certain instances it is necessary to replace the entire track, which is easily done with an universal replacement kit that is available at most major hardware stores. These kits are simple to install and will get your door back to normal in no time at all.

It is important to inspect the frame of your sliding door and hardware for signs of wear and tear, for instance loose bolts or screws. This is a simple and effective DIY patio maintenance task that can be accomplished with an electric screwdriver. In addition, it is essential to oil your tracks and rollers to make sure they operate smoothly and prevent premature wear.

For many homeowners the patio doors are the main entry point to their backyard as well as outdoor living space. They need to be able to function properly to maintain the comfort of their home and offer security. By following these easy DIY maintenance tips, homeowners can prolong the life of their patio door and reduce costly repairs or replacements.

Faulty Handle

Patio doors that slide open are a great way to get into your home and gain access to your backyard, however they can become difficult to operate when they are not aligned properly. A defective handle could cause the door to become stuck or difficult to open and close. Repairing a damaged handle can be accomplished at home.

In many cases the loose grip is the result of screws that have slipped out of the backplate. To resolve this issue just tighten the two screws on the inside of the handle using a screwdriver. If the handle is still loose it could indicate that the threads have worn away and need to be replaced.

A broken latch could also be the reason. This is more likely to occur if the latch made of plastic, not metal. If the latch isn't turning or catching, you should try oiling it first to see if this helps. If not, you may have to replace the lock completely.

If the handle is damaged or broken, it could be difficult to operate. If this is the case, it will be necessary to replace it with a brand new handle that is in line with the design of your sliding patio door.

Feldco can help you restore your patio doors to their former splendor, no matter if they are new or outdated. We have doors of high-quality in various sizes and styles that can be installed to perfectly fit your home. For more information about our doors, contact us now! We serve Southern California homeowners, including Ventura County and Orange County.

Unusual Weatherstripping

If you're seeing light around windows and doors that are shut, or you feel a draft pushing against the door or window It's time to replace your weather stripping. These strips create a tight seal that blocks unwanted air, pests, and water from entering your home. It also helps keep your conditioned and heated air in, saving you money on energy bills year-round.

It may have lost its positive seal, bouncy, due to age. It is easy to determine this by taking a dollar bill and running it under the seal on top of the door frame as well as the bottom of the door jamb where the two meet. If the dollar bill slides effortlessly between the seal and the door, it's time to replace the weather stripping.

If you replace only the worn-out portion of weather stripping, this could result in future issues with the seal. It's much more effective to replace the entire stripping so that you can rest assured that your door is sealed again.

To make a DIY project that is simple take a look at our guide on weather stripping to remove old weather stripping. Then, you can apply the correct material on your sliding patio door and door frame to create a durable and secure seal. This is a great way to save money on your energy bills and fix your sliding patio door. Don't wait until its too late. You'll reduce your expenses and enhance the appearance of your home.