공지사항

Window Repairs

Window repairs can help homeowners save money and help keep their homes warm. In the event of serious damages, like broken glass or a cracked frame, a window replacement could be required.

But there are many other issues that can be fixed to prolong the life of your windows. The most frequent issues are:

Cracked or Broken Panes

If it's an unintentional rock thrown by your lawnmower or a tree's branch blown by high winds, cracked windows are not just unattractive but can lead to more expensive electricity bills because the broken pieces let cold air into your home. Luckily, it's typically easy to repair windows that have broken panes.

Begin by carefully removing the glass using gloves and sunglasses. You may need to use a utility knife to break loose the old glazing compound or putty around the frame's edges. Next, use a soft cloth or paper towel to clean the glass's surface and the frame's wood.

After the area is cleaned and dry, apply a waterproof silicone caulking around the perimeter of the frame. This will prevent water from leaking into the frame through the crack and result in further damage.

A crack that is severe in double glazed window repairs-paned glass can affect the gas between the panes, rendering your windows less efficient in insulating. If the crack is significant enough to threaten the quality of the glass or the glass has an inner pane completely missing, it might be time to call in an expert.

Cracks in the glass caused by thermal stress may occur when there's a significant temperature difference inside and outside your home. This causes the glass to expand and shrink. If this happens across two portions of a window it's recommended to replace the glass instead of trying to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready for replacement. It will also keep out cold and bugs. You can also cut an amount of nylon stocking big enough to cover the entire crack and then glue it to the surface with duct tape. This isn't an indefinite fix, but it will keep cold air out and insects away from your home. If you notice cracks or blemishes on your windows that are older, you should check with your local business to determine if replacing the whole window is a better solution.

Rotten Wood

Wood rot is a frequent problem for windows. It can ruin the appearance of a home and it can also pose a safety risk. It is possible to repair rotted wood. It is first necessary to address the cause of the wood's rot. Examine for leaks in the roof and other areas where water could get into the wood.

The next step is to take out any rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. After the rotten areas have been removed, you will need to replace them with new wood. It is recommended that you use pre-treated wood for this project as it will be resistant to decay. If you are unable replace the rotted wood, you can try using filler or wood hardener to help strengthen the damaged area. The majority of hardware stores have this type of product. To get the best results, adhere to the instructions on the product label.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant the wood. Sikkens for instance is a great one to use.

It is also possible to use an epoxy filler with two parts to protect the wood from further damage. It is simple to apply and gives an excellent finish. However, it is important that you follow the directions for application on the label. After the epoxy filler dries you can sand the wood's surface. Start with a rough sandpaper and then move on to an easier grade.

The last thing you would like to do is make the rotted area even worse by exposing it to more water. It is recommended, so, to cover the repaired surface with an oil-based primer that will protect it from moisture. After that, you can apply the waterproof wood sealant.

Won't Open

A window that won't open can be the result of various reasons. The house might have shifted, or the wood frames might have warped due to humid weather. There is also the possibility that someone secured them with a nail for security. With a little patience and the right tools, you can unlock most stuck windows.

Gunk or debris that has accumulated can be a major reason of a window not opening. Acme Glass notes that dirt and grime builds up over time on the sliding tracks, hinges, and locks. Metal hardware can also rust when it comes into contact with humidity and direct sunlight. Spray grease on these areas can help prevent oxidation, and ensure that your windows are operating properly.

Stuck windows can be the result of an unintentional break or loosening of the pulleys that are used to raise and lower the window. These components can lose their tension and get blocked, especially if the Window repair is located two or more stories above the ground.

If you are having difficulty opening a door, use a pry-bar to gently open the window. Put a block in the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood and make it easier to move.

A broken spring could be the reason for windows that aren't able to raise or lower. Depending on who manufactured your windows, you'll need to refer to the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they cannot open, it's probably time to replace windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let your windows go from functional to useless since windows that aren't properly shut could make your home vulnerable to water damage and burglary. Contact us today to learn more about our replacement windows and services!