공지사항

Tilt and Slide Patio Door Repairs

A functional tilt and slide patio door offers light, fresh air and easy movement between indoors and outdoor. Modern aluminum doors offer durability and strength along with thermal stability and a variety of glass options for an array of styles.

Dirty tracks and rollers are the primary reason for sliding door issues. Regularly cleaning and lubricating the moving parts can help keep your sliding door in good condition.

Track and Roller Replacement

Track and rollers are the principal components of sliding doors. They are located at the bottom of a door panel made of aluminum and rest on a raised track that allows them to move when they open and close. Over time, dirt may cause the tracks to become clogged and cause the rollers to become damaged. Cleaning your patio door and well-lubricated can prevent these problems.

Unless the track is badly bent, it's usually possible to repair the track and rollers without removing the door. Recruit a friend and then tilt the panel towards you to lift it off the bottom track (Photo 3). This could take some effort since the panels are heavy. Once the panel is removed place it flat on sawhorses and inspect the rollers. If they are damaged, replace them with a new roller assembly. You can adjust the rollers' height by turning the adjustment screws, which are usually located in slots along the edge of the panel.

If the rollers appear to be good, they may only need to be cleaned and lubricated. Make use of a screwdriver to take off the rollers and clean each one with denatured alcohol. This will get rid of any grime or dirt that might be causing the resistance. After carefully placing each roller into its slot completely retract it using the adjustment screw. Last but not least spray the rollers using silicone spray. This type of lubricant doesn't retain dirt as petroleum-based products do and will help your door move smoothly.

After cleaning the rollers and installing them, you can put the door back in place and test it to make sure the track is properly aligned with the rollers and that the doors are sliding smoothly. If you experience any other issues, call a local door dealer for assistance. Keep your doors clean and well lubricated to prolong their lifespan and decrease the need for repairs. We recommend a lubricant made of silicone, as it will not draw dirt as WD-40. It is recommended to grease your tracks and rollers at least once per month.

Insect Screen Replacement

Sliding patio doors are great to maximize floor space, providing airflow and allowing beautiful views. However, they can be a problem in the event that the mechanism isn't working properly or has stopped completely. Fortunately, the majority of issues with sliding screen doors are easily resolved. Dirty rollers from debris in the track or a wrinkly screen are the most common causes, but you can usually solve them by following these easy steps.

If your screen is sagging, or wrinkled, place a 1x4 underneath each end of the frame to create an incline in the middle. This will help pull the screen tighter and straighten it.

Buy a screen that's at least two inches bigger in both directions than the frame's opening. You'll be able reduce any excess. Make sure you press one end of the rubber spline into your channel using a spline rolling tool. Once you have done this, it's time to add the rest of your spline.

Adjusting the Panel

Instead of sliding doors that open by turning the handle, tilt and slide patio door repair company door mechanisms permit you to leave the doors wide open to let air circulate while keeping the kids and pets away from your home. The doors require more force to open than you would think. In time it can lead to increased friction and uneven tracks, or misalignments that could cause the door to not function as it should. Recognizing these issues early and making small adjustments can often fix them, thus reducing the necessity for expensive replacement hardware.

The first step in adjusting a tilt and slide patio door is to remove the door and set it on a flat work surface. After removing the panels employ a screwdriver to take the caps made of plastic from the holes of each adjuster. Once they are removed, the adjuster will be removed from its channel by using an extended shaft screwdriver. Once the adjuster is removed and placed on a flat surface, then clean it with alcohol rubbing or a stronger version like denatured alcohol. This will remove any dirt that causes the roller to become resistant and allow it to retract back into its channel after the process.

When reinstalling an movable panel align it with the frame and use the drill to drive the screws into the flange. The flange must be secured securely to the door's edge while making sure the flaps are properly positioned. Once the movable panel is in place, apply a bead of silicone-based lubricant on the top track arm connector block as well as the lead Bogie wheel and the slave Bogie wheel, and then replace the plastic hole caps.

Repeat the procedure for the remaining two panels that can be moved to restore their slide function. Install the plastic flanges. Using a plastic adhesive, glue the jamb-side strip onto its fixed panel. Attach the handle when the glue has dried, and check the smoothness of the process. If the issue persists, adjust the lead Bogie by getting rid of it, cleaning it and installing it with a silicone-based grease.

Charley Bar Installation

A patio door can be a practical option to let your pet in and out of the house, but it can also be a access point for burglars. Put a pin lock on your patio door or a charley-bar for added security. These devices provide a mix of security and convenience that is unparalleled by any other product available.

The charley bar is an excellent option for sliding glass door and can be easily installed at home. The charley bars can be placed in the middle of the door to prevent the door from being jibbered with objects or tools like a hockeystick or the handle of a broom. The charley bar is made of injection-molded polycarbonate and extruded RPVC tubes that telescoping which makes it sturdy and durable.

The installation of the charley bar requires you to first determine the length of the bar from the edge of the track for sliding doors all the way to the sliding patio door. Then, mark the areas where the charley bars will go with a pencil. Use a drill bit of 8 inches to make holes in the wall jamb and the frame of the patio door be cautious not to cut through the glass of the patio door. Finally, insert the screws provided with the charley bars and tighten them securely.

The charley bars are a great choice for sliding patio doors repairs glass patio doors or windows with sash. This simple security device will keep your patio sliding doors tamper-proof and burglar-proof for years to be. It is made of polycarbonate that has been injected, and it has been tested by Intertek to withstand over 400 pounds of pressure. In addition, the charley bar can be locked with the key that comes with it. It's easy to put it up and hangs away when not in use. You can buy a charley bar from most hardware stores. However, if you want to get one that is sure to work, consider purchasing a charley bar from an online retailer.