공지사항

Choosing uPVC Replacement Window Handles

Most customers agree that these replacement windows near me window handles made of upvc are easy to install and feel as good quality. It is important to be aware that the handle you select for your window should be suitable for the window.

The key factor is the step height that refers to the space between the handle's nose to the frame or base. Other factors to consider are lockable styles and mechanisms.

Replacement parts

There are a wide range of replacement window handles made of upvc available to buy. They are available in a variety of styles and colors so there's sure to be something to suit your windows. It's easy to buy on impulse especially if the handle fails, therefore it's a good idea to look over the details prior to committing to buying a replacement. First, you must be aware of the type of upvc handles you have and what the differences are between them. The table below lists the most common handles so that you can find the right one to match your window.

Most double-glazed windows today have handles that are epag. They are typically attached to the frame using two screws that screw in from above and below.

The spindle bar in the back could be of different sizes, and will determine if they are left-handed or right-handed. This is why it's important to take a measurement of the handle you have to ensure that you're ordering the correct replacement.

Typically fixed by two bolts similar to the Espag handle, they have a lower projection from the frame, which means that the arm will not penetrate your blinds. This is a great option for blinds on your windows made of upvc and you want to make sure the handle blends with them.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the window frame. This kind of handle is available on a few older wooden and Upvc windows.

Tilt and turn handles are usually found on casement windows and can be operated by turning the handle or pressing on the top of the window. The window is opened from the inside and lets you to clean the outside without having to go out onto a ladder or climb over the garden fence. They're also an excellent option for those who have limited mobility and enhance security and access to the home.

Tips and suggestions and

Many people will need to replace their uPVC window handles at some point. It's important to have some tips and tricks to make the job easier.

The first step is determine the type of handle you have at home. Depending on the type of handle is attached to and which locking mechanism it utilizes, it may be necessary to replace the entire handle and lock. If the roller cams and shoot bolts (espags) are blocked or seizing up, you'll need to replace them as well as the handle.

Thankfully, the majority of uPVC handles adhere to industry standards and are alike. This allows for a relatively easy process. The first step is to remove the screws from the handles. These are usually using pozi-drive screws. Once the screws are removed you will be able to dismantle the handle.

It's a great idea to take note of how far the spindle protrudes from the base of your handle when you separate it. This will help you to determine the length of the spindle for the replacement handle. Simply measure the length the peg is sticking out of the bottom of handle.

This is particularly important for inline uPVC window handles because they are always straight and will only open either left or right, and will not operate in the middle. It's a good idea if you are not sure what type of handle you have in your home, to borrow a handle and see how it works.

You can also determine the hands of a uPVC window by observing how the handle rotates when it is in use. Handed handles will turn either clockwise or counter-clockwise. If you are unsure you are, ask someone else to open the window with the handle and observe how it works.

Find the spindle's measurement.

Choosing the correct replacement window handle handle for your windows can be a challenge as there aren't all handles that are identical in size. It is crucial to measure the spindle accurately when fitting a new handle. This will ensure that the handle fits. There are a variety of types of uPVC window handles and they operate in different ways, so it is essential that you know which kind of handle you have and the type of locking system that you are using.

Espag handles have a spindle that extends from the rear of the handle, and is inserted into the lock gearbox within the window frame. When you turn the handle, this turns the lock within the gearbox, and opens the window. They are used on uPVC windows with casement. They can be locked using keys to provide additional security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They are characterized by a "nose" that is secured by a wedge-shaped striker block. They are also relatively easy to install and can be locked with keys. It can be more difficult to replace these handles as they are not as popular as the handles made of espagnolette.

If you have a tilt and turn uPVC Window Panel Replacement, you'll need to get a special type of uPVC replacement handle with an additional locking mechanism. The handle will tilt the window and also allow it to be turned back and forth to fully open it. You will need to ensure that the handle you select has a spindle size of at least 55mm or it won't be able to penetrate the window frame.

The same procedure can be used to remove and replace the uPVC handle. However, you will need to take care when unscrewing it. It might be necessary to open the window a bit wider than usual to access both screws that secure it to the frame. After you have installed your new uPVC handle and ensured that it is in the right position, you can tighten the screws, and test the lock to ensure it works correctly.

Install the new handle

If you have the proper replacement handle, it should simply be screwed into the correct position. It will require a screwdriver and an electric one could be more convenient. It is important to not overtighten the screws before screwing them in. This can cause the handle or knob to warp.

Inserting the spindle is the next crucial step to install the new handle. This is the component that is inserted into the handle and operates the locking mechanism within the window. It is crucial that it is installed correctly since it will ensure that the window can be closed and opened with confidence.

There are a variety of different kinds of uPVC window handles. There are several types of window handles made of uPVC.

Espagnolette Handles are inline handles that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curvaceous design that can be useful for windows in hard-to-reach locations.

Tilt and Turn Handles These are used on tilt and turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames are equipped with these. They are commonly called 'Bay Windows in the UK.

If your uPVC window handle is broken it can be a major hassle. But, there isn't a need to replace the entire uPVC window just because of a broken handle. There are a number of simple ways to repair and replace a broken uPVC window handle.

You can fix your broken window handle swiftly by identifying the type and measuring the spindle. It is important to take your time and prioritise safety when working with windows and tools however, this is a straightforward task. It can make all the difference between a secure and safe home or a vulnerable easily opened window! Bridgewater Glass is the place to go if you're in need of help or would like to speak to a specialist regarding replacing your window handle. We have a group of experienced and knowledgeable experts who can assist with any issues you might be experiencing.