공지사항

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause severe damage to your home and may even be fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

Single-pane windows are relatively easy to replace and generally fit into frames of the past easily. If windows with double panes are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to attempt to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor and could be trampled.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to block drafts and water from entering the home until a professional can come out and repair the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap is large, you might think about an alarm door that comes with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could develop a variety of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your upvc window repair near me window is beginning to sag it's crucial to act fast to stop the issue from worsening.

Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need to open the window so that you can get to the frame. Then, using the screwdriver, you'll be able to take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and test it for fitting. If you're happy with the fit, tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you may need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. This is usually due to screws that have loosened over time, but it could also be caused by the handle mechanism getting worn out. Luckily, it's not difficult to repair a loose uPVC window handle yourself. First, you'll need to close the window and then perform an experiment fit. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a simple fix that can be accomplished by any DIYer who has the ability. Based on the severity of the issue the old caulking may need to be removed before a fresh layer is applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with a breeze. They can be repaired by any skilled DIYer and can usually be done within a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they can wear down over time. It's easy to change a window hinge however it is easier if someone helps hold the frame.

Verify that the upvc Window repair hinges are open and closed in the proper direction. You can check this by checking for the arrows on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. This issue can be fixed by sending us a picture on our website. We will be happy to give you suggestions.

It is also important to lubricate the hinges regularly. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form between the sash and the frame. This can be easily repaired by giving them good clean, but if they are beyond repair it might be necessary to have them aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can also become misaligned, again it's possible to give them a clean but in some instances it could be necessary to have them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

One of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically made of fabric which are filled with a type of filler. They can be positioned on the windowsill on top. They will help block out cold air and keep your home warm and cosy!

Your upvc windows can continue to provide excellent insulation and security for your home with regular maintenance and repairs. However, it is important to recognise that all windows have a lifespan and they may reach a point where it is more cost-effective to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.