공지사항

upvc window handle replacement handles for windows (just click the next webpage)

It's simple to replace a broken window handle with the proper tools. It's important to identify the kind of handle you have and the spindle's size before purchasing the replacement.

Older uPVC window handles have a spur which extends and is locked over the cockspur wedge striker. They can be left or right-handed and need to match when replacing.

What kind of lock or handle do you have? I have

There are a myriad of windows locks and handles made of upvc each with its distinct advantages and functions. The type of handle you choose will determine if the locking mechanism you have is effective and if it's easy to open the windows. As time passes, and with regular use the upvc handles that are on your windows could become damaged and worn out. This makes them less secure and effective. In some cases they could even fall off completely. If you find that your window handles have fallen off, it is crucial to fix them as soon as possible. This will help prevent burglaries and ensure that your home is secure.

The good news is that replacing your window handles made of plastic is a simple task that can be completed by nearly anyone. With a few basic tools and the right information it's a simple procedure that should take no less than a few minutes. You must be aware of the type of lock or handle you have on your window. This will help you choose the right replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They are flat and have an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles also have a spindle that goes through the middle of the handle and then into the window frame to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are attached to the frame of the window by only one screw and are less secure than other varieties of window handles.

Tilt and Turn Handles

As opposed to the other handles made of upvc, tilt and turn handles can be turned to open the window and the handle can be tilted to the side for ventilation. In general, they have a 7mm spindle on the back of the handle and are available in left and right handed versions.

It is important to measure the spindle size when buying replacement upvc handle. Not all of them are exactly the same size. Drop something in the middle of the hole to measure the length. This is the length of the spindle that will fit your window.

What is the spindle?

uPVC window handles function similarly as doors, with the user turning the handle to activate an opening inside the frame. This opens the window to allow it to be shut and opened. The handles can become damaged, especially if frequently used or exposed to harsh environments. This can leave you needing to replace your uPVC windows handles as they might not operate the window properly for a long time.

There are many different types of uPVC handle options, including Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in various ways and each handle type utilizes a specific spindle to lock the mechanism to the window. This is why it is essential to identify the type of handle you have on your uPVC window to find the right replacement.

You can check what type of uPVC handle you are using by taking a look at the base of your handle. A snap-in cover is over the screw that holds the handle's base in position. Remove this and then you should be able see the second holding screw located at the opposite end of the base section of the handle. After both screws have been removed, you should be in a position to pull the handle away from the uPVC window.

After taking off the uPVC handle, remove it from the locking mechanism. Make note of the length of the spindle as you'll need to make sure that you buy an alternative that is the same length as your original handle and locking mechanism.

The spindle wears out and becomes inoperable with the locking mechanism. This could be due to damage from constant use, a loosening of the locking mechanism or even corrosion that occurs over time. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I remove my old handle?

Through time and regular use, window handles can become damaged or broken and if this happens it is essential to fix them as quickly as possible to ensure the security of your home. It is good to know that replacing a worn or damaged handle is a fairly simple task that can be accomplished in less than an hour and doesn't require any specialized tools.

To take off the handle, you must first remove the screw located at the bottom of the handle. Once the screw has been removed, the handle will be pulled away. A second screw is situated at the base of the handle. This can also be removed. After both screws are removed the handle can be completely detached from the base of the window.

After removing the handle and fixing holes, align the holes of the new handle with the existing holes in the window frame. There may be a tiny cap or sticker on the new handle, so take off the caps if needed, and then screw the handle in the frame. It is essential to ensure that the handle works once it has been installed. Turn the handle around and make sure that the lock mechanism is activated.

Espag handles feature spindles that extend out of the handle and slot into the multipoint locking mechanism of the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over the frame's outer or transom bar cross member inside the window.

After you have installed the new handle, insert the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) after the handle is fixed. When the handle is ready to use, you can open and close the window a few times to make sure that it functions properly and securely.

How do I fit the new handle?

It's not difficult to alter the handle on your uPVC windows. The process is very easy. All you need is a screwdriver, and a small amount of patience. First, ensure that the handle is not locked. Remove any screws visible. You could also replace them with screw caps. After you have removed the handle, you will need to note the length of the spindle which extends from the back. This is important as it will determine the type of handle that you will need to buy.

Espagnolette handles are the most popular type of handle for uPVC windows. They have a spindle which is inserted into the handle and acts as a locking mechanism inside the frame of the window. The handle releases the latch, allowing the window to open. Over time and through regular use, espagnolette handles can become damaged or impaired, making it necessary to locate an alternative.

Cadenza handles are a second type of uPVC window handle commonly used on tilt and turn windows. They have an elongated blade that functions as the multipoint locking mechanism inside the window. They are generally more secure than handles made of espagnolette because they can only be opened from the inside. They can be replaced by the same procedure as espagnolette handles however you must make sure that the new handle has an angled blade as opposed to flat ones.

Once you have selected the correct handle, simply align the new handle to existing screw holes before screwing it into place. After that, you should put the screw covers back on and make sure the new handle functions correctly. This is accomplished by shifting the handle from the locked to the unlocked position and vice versa a few times. If you encounter any issues, it may be worthwhile contacting a professional to see if they can help resolve the problem. They can often advise you on the best way to solve the issue in a quick and effective way.