공지사항

Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers that help the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor, where they could be trampled.

It's a good idea to tape the gap once the glass is removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the distance between the door and the window is large, you might need to consider security screens that has a window. This will give you the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues that include sliding. A sagging uPVC windows can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window repairs near me to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform an experiment fitting. The joint at the corners of the sash should align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a fairly simple fix that can be done by any competent DIYer. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to remember that when it comes to upvc window repairs (learn here), do not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Other indicators of water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is related to the seal, not the frame. It is also possible to be repaired by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with a breeze it could be hinges at fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Like all mechanical parts hinges are prone to be damaged over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. This can often be resolved by sending us a picture on our website. We will be more than happy to give you advice.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also lower the possibility of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also be misaligned due to wear, causing a gap where the sash meets frame. If they are beyond repair, it might be required to realign them. Second, the interlock can be unbalanced. This is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a life span and they may reach the point when it's more economical to replace them than fix them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional immediately.