공지사항

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. You should take the time to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and typically fit into frames of the past easily. If windows with double panes are joined by internal beading, it is harder to remove and replace the old panes. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the window and the door is large, you might need to consider a security screen that also has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a variety of issues that include sliding. A sagging window in uPVC could cause issues with light, draughts and even security. It's important to take action immediately if you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. Then, using an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you can't reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

UPVC handles can also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an experiment fitting. The corner joints of the sash need to align with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is important to act if you wake up every morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leakage originates from the glass in your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are stiff to open, or slack and open in a breeze, it may be the hinges that are at fault. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It is essentially a simple process, but it's easier to do with someone else to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain manner or because of inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph on our website. We will be happy to give you advice.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows sticking and prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become unbalanced due to wear, which can cause gaps between the frame and sash. They can be repaired by giving them a good clean, but if they are beyond repair it might be necessary to get them realigned or replaced. The interlock may be misaligned. This happens on the hinge's side and may need to be cleaned. In some cases, it may be necessary to replace them.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help stop draughts. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security for your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.