공지사항

When It's Time to Repair Windows

If your windows require repair, you must work with care. First, put on a pair of cut-resistant gloves and safety goggles to prevent glass shards from cutting you during your work.

A quick solution to a damaged window is to put a plastic cover over the crack. This will stop rain, snow and insects from getting into the home.

Cracked Glass

Glass that has cracked can make your home appear less attractive and allow drafts to pass through. It doesn't matter if the cracks are caused by an impact, like soccer or baseball, or stress, like an abrupt temperature change, it is important to have them repaired as quickly as you can in order to prevent further damage and to ensure that your windows are functioning properly.

If your window is cracked, but not broken, a simple solution is to use clear tape to cover it. It's an easy and affordable solution that can provide protection from water, dust bugs, and other squatters and keep out the elements.

If the crack is extensive or is getting worse, it's recommended to consult an expert. A glazier who is experienced will be able to determine the root of the problem and recommend an appropriate repair procedure.

A crack caused by an impact is the most frequent kind of window break, typically caused by a sharp object hitting your window with enough force to break it. These cracks usually have an arc of lines and broken pieces. They can be dangerous when they break loose. This crack can compromise the gas between the panes of your double-pane windows and lower its energy efficiency.

Another kind of crack is a stress fracture, that develops slowly over time due to extreme temperature fluctuations or other environmental factors. These cracks start around the edges of your window, and eventually enlarge into full-blown breaks.

A more serious, but doable crack is the pressure crack. This is most often a curvy line that runs across one or more sides of your window. It could be a result of high or low air pressure that can cause contraction or expansion of the glass.

There are other products that can be used to repair cracks in windows If you're willing to go further than tape and nail varnish. A product like Glass Repair Film is a bit more expensive but will provide more protection and a longer lifespan for your windows. If you'd prefer to DIY epoxy is an adhesive that can be used to fill in cracks and stop further damage. It can make your window appear as if it never had any cracks at any point.

Leaking Windows

If you notice a damp spot under your window, or notice that the wood around it is soft or decaying, it might be time to consider a window repair project. The excess moisture can create the perfect environment for mildew and mold, which can create a range of issues for your home. They can affect the quality of indoor air, lead to sagging drywall and even increase the severity of allergy symptoms. If not addressed they can cause structural damage to the house.

If the water is coming in from outside or is visible through the frame it's best to get a professional to help you with the repairs right away. Leaking windows are among the main causes of structural and mold damage, so don't leave them untreated.

In many instances the use of caulking is to stop leaks. Before you apply the new caulking, it's necessary to clean the area and take off any caulking that is in place.

You'll also have to inspect the weep holes on the frame to ensure they're not clogged with debris. These are designed to drain excess rainwater, but they could become clogged with insect corpses and other debris over time.

Examine the seal between your double-paned window and the frame made of metal. This creates a barrier of gas between the panes, which makes the windows more energy efficient. The seal can wear down over time, however, and let water leak into the house.

Water stains on walls and ceiling are another sign of a leak. The drywall will turn discolored once it is soaked with water. You might also find peeling paint as a result of the water weakening its adhesive properties and pulling it away from the wall.

Faux Muntins & Mullions

In the past, muntins and mullions (or glazing bars in the UK) separated and held glass panes in traditional multi-pane windows. Since larger expanses of glass with tempered coatings became available following WWII They went out of fashion. They're used only as decorative elements in some older homes.

Rain or wind can cause damage to a single support or a small group of them, creating cracks in the window. The good news is that you can repair the majority of these decaying or brittle elements.

First, clean the affected areas using a rag and an ammonia-based cleaner that won't leave a residue. Get rid of any rotting or loose pieces and cut the intersections of the horizontal and vertical window muntins using an exact knife. Once you've trimmed the intersections, tape off the lower part of the window repairs near me frame using painter's tape. Then, you can apply a thick coat of white paint, paying special focus on the areas that were lightly coated in the first pass. Let the paint dry completely before removing the tape and applying a second coat.

If the problem is more severe such as an hourglass-shaped crack in the middle of the window, it's best to replace the sash. In these cases you'll have to search for a replacement that is similar to the window that is in place in terms of style and size.

If you want to save money you can install an attached grid window. These windows are constructed of a glass pane with a series muntins that are glued on the surface. This creates a split appearance. They're not as energy efficient as traditional windows, however.

Installing a drip cap will prevent water from leaking into the window frame. You can purchase a range of these drip caps made of aluminum at most home centers for about $20. They are much easier to install than replacement window sashes, and will provide the same functions as a real mullion or muntin.

Broken Sashes & Frames

A broken window sash should be a signal that you must call for help. A sash that is broken not addressed, can lead to water leaks, wood decay and other serious problems to the frame and sill. If you have a broken window sash, replace it as soon as possible to ensure that your window repairs is sealed and working.

The issue is usually caused by worn-out or improperly installed cords. Fortunately, replacing them is quite simple and can be done in all double-hung windows. To begin, you'll need to dislodge the metal tabs that keep the sash in place. Then, push up on the other side of the sash (it doesn't matter which side) and then pull toward the opposite side in order to take it off. You'll want to carefully remove the strip that divides the sash from the other so you can access the location where the sash cords are.

It's important that you compare the metal tabs of the old sash to those of the new one. If they are different it can be difficult to insert the new sash in its proper place and could affect how well the sash performs. This can be easily fixed by placing the tabs in their correct locations on your new window.

You'll have to examine the frame of your window, too to look for any signs of damage or decay. It's recommended to check it regularly since wood shrinks and wears down as time passes, particularly with exposure to the elements. You should fix any visible damage as quickly as you can, to avoid a larger problem.

If your window frames are in bad condition, you'll have to treat them using a homemade preserver made with half mineral spirits and half boiling Linseed oil. After the treatment has dried, you are able to refinish your frames with high-quality latex paint. A fresh coat of paint will also shield your window from the elements.