공지사항

Double Glazed Window Repair

Double glazing is an excellent energy efficient investment that stops heat loss in the winter months and helps keep your home cool in the summer. Having your double glazed windows repaired when needed is an excellent way to ensure that they function correctly.

Over time, condensation and misting can impact your double-glazed windows. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A stray baseball or a flying pebble from your lawnmowers, or even a storm that is heavy can shatter the double panes of your windows and expose your home to the elements. While a damaged glass window is difficult to repair but it doesn't have to be replaced. The insulated glass that is between two glass panes is in good condition, so you can repair your double-paned window yourself.

To begin, you'll need to take the broken glass out of the frame. This will be an unpleasant task and you'll need to be cautious to prevent any glass fragments from falling on the floor or falling out of the frame. Make sure you wear gloves to protect your hands, and a cloth to protect the area around the broken glass to prevent further breakage or cuts. After removing the broken piece, carefully clean the entire frame of the window to remove any remaining sealant and debris. Sand rough areas of the frame to create a smooth surface on which to install your new glazing.

After cleaning the frame, you can apply another layer of glass to the area where you removed the broken pane. This is the best way to keep your window secure and sealed and help you save energy costs by preventing drafts and water from getting into your home. The next step is to select your glazing material. There are several options available, including clear tape that is more robust than regular tape and will keep your window safe from further cracking, as well as glazing film that resembles clear plastic wrap. The benefit of this option is that it can be painted over to match your frame, and it will keep snow and rain out as well.

Whatever material you select regardless of the material you select, it is crucial to press glazier's points into the seam where the putty meets the frame. These will hold the newly-formed glass in place and aid it adhere to the frame. Hardware stores carry glazier's point ropes that can be rolled out on the frame rabbets.

Condensation

If you have a problem with condensation, it's recommended to contact your window manufacturer. Many have warranties and guarantees that cover these issues. Fogging and condensation between panes of glass is a clear indication that the seals between your windows have been damaged and can only be fixed by an expert who will repair both panes.

The process is complicated and requires the use of special tools to remove the old one and replace the new one, however it can be accomplished by a professional who will provide the required equipment. It is best to leave the work to an expert. These tools could be dangerous.

If you do decide to do it yourself, make sure you wear safety glasses and gloves to protect yourself from broken glass pieces that could fly off during the process. It is crucial to take out all putty or metal glazing points from the grooves that will receive the new window. It is also recommended to wire-brush the frame and vacuum or wipe it with a damp cloth. After the frame has dried you'll have to purchase another piece of glass that's 1/8" shorter in both directions than your existing window. Make sure the glass fits into the grooves.

You will have to apply a layer of silicone caulk to the grooves of your frames to ensure that your new glass is secure in its installation. After the silicone caulk has dried, you can smooth it out and make any adjustments. The wood molding can be reinstalled.

If the weather abruptly changes, double-glazed windows can be difficult to open and close. Extreme temperatures can cause frames of double-glazed windows to expand or contract, which causes them to sag and stick. Try wiping the frames with water and then lubricating them when this happens however it is better to seek advice from the company who installed your windows.

Misted

Misted Double Glazing is a problem with windows that occurs when moisture gets trapped between the glass panes of double glazed windows. Double glazing is made up of two panes that are separated by a space that is filled with argon for greater thermal efficiency. This results in an airtight seal that keeps warm indoor air inside and cold air outside.

In time, however, this seal can break down and moisture will begin to accumulate between the window repairs near me panes, causing them to become cloudy. This happens because the gap between the panes is heated by sun, causing water vapour to develop in it.

This is a normal occurrence, but when it occurs between the window panes it can cause a problem as it can no longer control the temperature in the room, and allows the outside temperature to influence the indoor temperature. If you notice that your double-glazed windows are turning cloudy, contact the experts at Northfield Glass to investigate.

We can replace a single sealed unit without needing to replace the entire window. This is much less disruptive than a complete replacement. Our misty window repair involves taking off the glass, cleaning it, and then replacing it with a new one to make an airtight seal.

Some companies in the field claim that they can inject chemicals through holes drilled into misted windows to remove the fog and condensation. We don't suggest this method. This method is not only unsightly, but it could also harm the toughened glass and leave you with windows that do not fully function.

It is essential to address the problem as soon as you can, as if untreated, it could lead to mould growth, which not only damages the window, but also poses health risks for your family members. Moisture can also cause other issues within your home, such as dampness or rot. In some instances, the window may need to be replaced entirely.

Failed or Blown

Double-glazed windows consist of two panes of glass with an inert or air between them. This increases their thermal efficiency by keeping heat in and cold out. As time passes, the gas may depressurize, leading to a number of issues.

One of the most common is condensation occurring between the panes. It's not an indication of a failure in the window however it could indicate that you need to reseal the windows. Condensation could be a sign your double glazing is damaged in which case it should be replaced completely.

It is also important to look for drafts coming through your double glazed windows. This could be because of the seal being damaged or a damaged handle or a broken lock. A draught is noticeable and will lead to higher heating costs, so it is important to get it fixed sooner rather than later. You can test the seals by placing your finger around the edges of the window frame to see if you feel any cold air.

You may also see water beads on the inside of windows when your window seals aren't performing as they should. This is an indication that you need to seal your double-glazed windows.

Your window frames have been designed to move slightly and this is essential to keep the glass sheets in their place. In time, this special packaging material may be compressed. This will cause the seal to become broken. This allows air to flow between the panes, reducing the efficiency of your window's energy consumption.

Double glazing that has broken an air seal is an indication of failure and should be fixed as soon as is possible. A damaged seal can stop your double glazing performing its primary purpose which is to keep the cold out and warm air in. A blown seal can also let moisture in your home, which can result in mold and other unpleasant conditions. It is important to contact a double glazing repair specialist when you notice a blown seal in your double-glazed windows, as they can replace the entire unit.