공지사항

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't corrosion or rot.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames that were previously in use very easily. If windows with double glazed window repairs panes are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this case, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is a must if you plan to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass, so that any shards fall onto the fabric instead of landing on the floor, where they could be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop water and drafts from entering your home until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sagging. A sagging window in uPVC can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit, tighten the screws until they remain in position.

If you aren't able to move the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's important to replace the seal as soon as you can to ensure that your upvc window repair near me windows are waterproof and secure from draughts.

UPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it could also be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close the window and then perform an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the problem the caulking used previously may need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease It could be hinges that are at fault. They can be easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It's easy to change a window hinge, but it's simpler if you have someone to help you hold the frame.

Check that the uPVC hinges are open and closed in the correct direction. You can do this by looking for the arrow on each hinge. This shows which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or by inadequate installation at the factory. This issue can be fixed by sending us a photo on our website. We will be pleased to offer you advice.

It is also essential to grease the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window operate and close more smoothly. It can also prevent corrosion and reduce the possibility of sticking. This must be done at a minimum once a year. WD40 and other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by different factors. The hinges can also be disaligned as a result of wear, creating gaps where the sash and frame meet. These can be easily repaired by giving them good clean, but if they are beyond repair it may be necessary to have them aligned or replaced. The interlock, which is located on the hinge of the window and can also be misaligned, and again it's possible to just give them a clean but in certain cases, it may be necessary to have these replaced.

These seals can wear down or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce the risk of draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be placed on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

The windows made of upvc can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. However, it is important to realize that all windows have a life span and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you are having issues with your upvc windows, it's best to seek professional assistance as soon as you can.