공지사항

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. They do not decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

For single pane windows it can be relatively simple to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this instance it is essential to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must if you plan to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a good idea to seal the gap after the glass has been removed. This will stop water and drafts from entering your property until a professional arrives to fix the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap between the window and the door is significant, you may prefer security screens that has a window. This will give you the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. In time, they could develop a variety of issues that include sagging. A window that is sagging can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can reach the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and test it for an appropriate fit. If you're happy with the fit, you can tighten the screws to ensure they stay in position.

If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and window Repairs dry out, which causes them to loosen. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could be due to the handle mechanism getting worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it does not you can use a screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's crucial to take action. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how severe the issue is, the old caulking might need to be removed. It is crucial to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens in a breeze. They can be replaced by any competent DIYer and are usually done within a few minutes.

Like any mechanical part hinges will be damaged over time. It's very simple to replace a hinge on a window, but it's easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain way or by inadequate installation at the factory. This can often be resolved by sending us a picture on our website. We will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your upvc window repair window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, could become misaligned. This causes an opening to appear between the sash and the frame. These can be easily fixed by giving them a good clean, but when they're beyond repair, it might be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it is feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be positioned on the top of your windowsill. They will help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security to your home by performing regular maintenance and repairs. It is important to remember that all windows eventually wear out and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert immediately.