공지사항

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as aluminum or timber.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing everything you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is harder to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop water and drafts from entering the home until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, upvc you may want to consider using a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they are susceptible to a range of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action immediately if you discover that your upvc window repair near me windows are falling down.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window so that you can get to the frame. After that, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry which causes their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles may also become loose. The majority of the time it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial test to ensure that it fits. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then return the mechanism to its original its original position.

3. Water Leaks

It is crucial to take action if get up each morning to find a smoky wall and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris inside them and that the sill pan is properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

If the leakage is occurring between the double glazed window repairs near me-glazed window, it is more likely the problem is with the seal than the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze It could be the hinges that are at the fault. They can be repaired by any skilled DIYer and are usually completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It is very easy to change the hinges on a window but it's much easier if someone helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. You can do this by looking for the arrows on each hinge. This shows which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to inadequate installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you suggestions.

It is also essential to grease the hinges regularly. Applying a light engineering lubricant on the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. This must be done at a minimum once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, can become misaligned, this will cause a gap to form between the sash and the frame. If they are beyond repair, it could be necessary to get them re-aligned. The interlock, which is on the hinge side of the window and can also be misaligned, and again it is feasible to give them a good clean, but in some instances it could be necessary to have them replaced.

The next most common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognise that all windows have a life span and there may come an point at which it is more economical to replace them than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.