공지사항

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, repairer it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to take out the existing panes and install new ones. In this instance you'll need to source some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you plan to try to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they can suffer from a variety of issues like sliding. A sagging uPVC window can cause issues with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are falling down.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've moved your hinges. If you're satisfied with the fit, tighten the screws to ensure they stay in position.

If you can't reposition the hinges you may need to replace the seal. Over time, repairer rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as you can to ensure that your upvc window repairs near me windows are watertight and safe from drafts.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it can be due to the handle mechanism wears out. It's relatively easy to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and repairer also affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any DIY expert. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer is applied. It is important to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them, and also ensure that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leak originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sagging. This can be easily fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens with an ease. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is simpler when you have a person to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should open.

The issue can be caused either by opening the window improperly or by a poor installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to provide assistance.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different things. The hinges can also be unbalanced due to wear, causing a gap between the frame and sash. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it might be necessary to get them re-aligned or replaced. Second, the interlock can be disaligned. This happens on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace them.

The seals may wear out or get damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The last way to reduce drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert immediately.