공지사항

UPVC Window Repairs

uPVC windows are energy efficient and can aid in reducing heating costs. However, as they age problems can arise which need repair. This could include damaged hinges, handles or locks.

DIY enthusiasts can repair wooden windows with ease. It can be cheaper than buying a brand new window.

Cracks

Cracks and fractures in uPVC windows could be a major issue. If windows are not properly repaired, they can result in water intrusion and less effective barriers to cold weather, and even structural damage. It is important to find an experienced local repair or builder who specializes in fixing uPVC frames and can demonstrate the experience, skills and tools needed to produce the best results. This will ensure that the crack is repaired before it gets any worse and that you don't need to replace your window glass or unit.

Small cracks in glass can be repaired by using a variety of DIY solutions. Masking tape and superglue are two of the most commonly used products to hold cracked glass in place for a short duration. For more severe cracks, the tape may need be extended on both sides.

Alternatively, two-part epoxy can be used to repair broken or cracked glass. Hardware stores typically sell this product for around $10. Ensure that your workspace is prepared prior to mixing the epoxy. Make sure you have the correct tool for the job, for example, a soldering tool.

If your upper or lower sash is difficult to raise it's due to the fact that the cords on the sash's weights have been damaged. This is an easy fix that is done using a ladder and a flathead screwdriver. Replacing a drip cap that has rot is another simple repair that can be completed at home. The drip caps that are not rot-free are readily available at many home centers and can be nailed and caulked into place with ease. Verify that the glass in double-paned or triple-paned window is not cracked. The reason for this is that the gases in the space between the windows are responsible for increasing the energy efficiency of the window and should not escape.

Water Leaks

If your uPVC window is leaking, it could cause damage to your home and cause costly repairs. Water leaks can also affect the structure of your home and can cause mold growth. It is important to fix any problems caused by leaking windows right away to minimize the damage.

The most common cause of window leaks is a damaged sealant around the frame. Silicone caulking can restore the seal to its original state and stop leakage. Look for gaps and cracks between the window frame and also the brick or stone wall that surrounds your windows.

Another reason for leaky windows is blocked drainage holes or faulty flashing. Verify that the drainage holes have not been blocked or blocked, especially after a heavy downpour. Also, you should check the flashing around your window to ensure it is well-sealed.

It's also important to ensure that your drip cap doesn't have any decay or is missing. A rotted drip cap or one that's missing will allow water from above to get into your window repair and cause structural damage. Replacing the drip cap that is leaky isn't difficult. It's as easy as purchasing an entirely new one and nailing it in place.

It's an excellent idea to have your windows tested for water-tightness with a professional. They can use a tool to measure your windows' water-tightness and ensure that they meet the standards of the industry. If your windows don't pass the test, you'll have to replace them. It's a costly repair however it's worth it to ensure the safety and security of your family.

Sagging

If your windows don't close properly, it could cause various problems, such as drafts, condensation and an increase in energy bills. It could be a sign that the windows were not properly fitted at installation or the sealant has stopped working. There are fortunately, a few options to fix the issue.

To fix your window properly it is essential to set up a workspace that is well-lit. Start by laying newspaper or an old blanket on the floor to protect it from drips or splinters that could be leaking from the window while you work.

You should also use a white cloth that has been immersed in a solution of water and detergent. This will help prevent any stains of color Window Repair from appearing on your windows. Mark the location of the hinge channel on your uPVC window when you are ready to begin working. Then unscrew the channel from the frame and fill the screw holes using epoxy (for uPVC windows) or wood filler (if frames are made of wood). Make sure to smooth out the hole that you have filled before it sets.

Once the holes have been filled you can reinstall the hinge channel. Make sure you center it on the window jamb and then drill the new screw holes about a quarter-inch away from the original locations.

Then, take a measurement of the length of the spindle that protrudes from the underside of the handle and order a replacement on the internet or bring the old one in to a hardware store for matching. Remove the setscrew off the operator shaft. Smooth it down to allow the set screw to be locked onto the shaft. Now, your uPVC window should be closing easily.

Broken Hinges

If your uPVC window repair hinges have been damaged or are not functioning correctly, you will find it difficult to open or close the window. This can cause an issue with security and stop your home from being warm or cool. It's easy to get a new hinge for your uPVC windows. However, it's important to ensure that you have the right type of hinge for your windows.

This is because the hinges must be of the same width to fit into the window frame. The most common type of hinge used in uPVC windows is a standard 18mm or 15mm UPVC window hinge. There are also specialised hinges for wooden frames. Choosing the correct window hinge for your windows will aid in avoiding common issues that homeowners face with their windows, such as not closing properly.

There are a variety of reasons your window hinges may have become stiff or loose. The hinges may not have been sufficiently tightened. To check, use an electric screwdriver to locate the friction screw on the end of the hinge. Loosen it. After that, you can adjust the hinge by twisting it in either direction until you get the desired result.

If your UPVC window hinges are not working as they should, call Preston Glass Fix for a quick repair. Our experts will assess the condition of your window hinges and recommend the best solution for you. We can replace window hinges, retension them or install new locking mechanisms to ensure that your UPVC Windows are secure and safe.

Faulty Locks

UPVC window locks and mechanisms are an essential part of home security. they make it very difficult to open the window without breaking in. It can be frustrating when a lock fails however, you don't have to replace the entire window.

Sometimes, the issue is a minor issue which could have been averted by regular maintenance. This is why we suggest having your uPVC windows serviced regularly with our yearly maintenance package to minimize the risk of having problems.

Most modern uPVC windows come with espagnolette locks that work by pushing the handle's nose across a wedge block and then turning the handle to close the lock. They are extremely efficient in keeping windows locked, but with time, they may begin to fail if they're not properly maintained. We recommend applying WD-40 to the lock at least once per year.

If you find that your uPVC window isn't opening and closing as smoothly as it used to or if the lock doesn't function properly, there may be a problem with locking gearboxes within the frame. The process of removing this gearbox can be difficult since it requires the removal of the seals that surround the frame as well as the removal of the handle (be cautious not to damage the seals).

A locksmith who specializes in UPVC repairs is able to diagnose this fault quickly and will then be able replace the failed locking gearbox with a exact replacement. This is a fast and simple fix that could save you hundreds of dollars by not having to purchase new windows.