공지사항

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If windows with double panes are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation you'll need locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing protective eyewear and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will prevent water and drafts from entering your home until a professional is able to fix the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap is large, you might want to consider using a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. In time, they could be affected by a variety of issues such as sliding. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action as soon as you notice your uPVC windows are sagging.

Repositioning the hinges can aid in fixing a window which is sliding. You'll first need to open the windows to reach the frame. After that, using an screwdriver, take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure that they stay in the right place.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes them to lose tightness. It is important to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can be due to the handle mechanism wears out. Luckily, it's not difficult to fix the loose uPVC window handle yourself. First, you'll need to shut the window and then perform a test fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also impact your ability to regulate the temperature inside your home. The most common reason for leaks in upvc window repairs near me windows is that the sealant around the frame is either damaged or is missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on how serious the issue is, the old caulking might need to be removed. When it comes to uPVC repair, you should be careful not to over-caulk. This can make your window harder to clean and reduce its energy efficiency.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the house.

It is also important to note that if the leakage is coming from between the glass of your Double glazed window repairs near me-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open in a breeze It could be hinges at the fault. These are easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It's very simple to change the hinges on a window but it's much easier if someone helps hold the frame.

Check that the uPVC hinges are closed and open in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation in the factory. Sending us a picture through our website can often solve the issue. We are happy to provide advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. First, the hinges because of wear and tear, may become displaced, which causes a gap to form between the sash and the frame. These can be easily fixed by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them re-aligned or replaced. Second, the interlock can also become unbalanced. This happens on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace these.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the possibility of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder, these are typically fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. They will keep your home warm by blocking cold air.

Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. It is crucial to recognise that windows last for a certain period of time and they may reach the point when it's more efficient to replace them than repair them. So, if you're experiencing issues with your Upvc windows, double glazed Window repairs near me it is always recommended to seek help from a professional immediately.