공지사항

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going to try to remove the glass panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a dropcloth before you begin working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor where they can be trampled upon and cause further damage.

It's a great idea seal the gap after the glass has been removed. This will keep drafts and water from entering your property until a professional arrives to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap is large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. However, with time, they may be afflicted by a variety of problems including sagging. A sagging uPVC window can cause problems with light, draughts and even security. It's important to take action as soon as you realize that your uPVC windows are sagging.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. Then, remove both the top and uPVC repair bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window doctor to check the fit after you have moved your hinges. If you are happy with the size of the window, you can tighten screws to keep them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. It is essential to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close your window and do an initial test to ensure that it fits. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to act if you get up each morning to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may require removal before a fresh layer can be put on. When it is time to uPVC repair, you must be careful not to over-caulk. This can make your window harder to clean and reduce its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are another sign of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to note that if the leak is coming from between the glass of your double glazing glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. It is also possible to be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with ease it could be the hinges that are at the fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they can wear down over time. It's very simple to change the hinges on a window however it is easier if someone helps hold the frame.

It is also worth checking that the uPVC hinges are opened and closed in the right direction. Check for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either by opening the window incorrectly or a faulty installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to provide advice.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few various factors. The hinges may also become misaligned due to wear, causing gaps between the frame and sash. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to have them aligned or replaced. In addition, the interlock could also become disaligned. It is located on the hinge's side, and may need to be cleaned. In some instances it might be necessary to replace these.

These seals can wear down or get damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will help to stop cold air from entering and keep your home warm and cosy!

With a bit of regular maintenance and repair your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to simply replace them than to repair them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as you can.