공지사항

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a great amount of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame of the previous one easily. However, if windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional is able to come out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is large, you may think about an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could develop a number of problems such as sliding. A sagging uPVC windows can cause issues with light, draughts and even security. It's important to take action when you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. First, you'll need to unblock the windows so you can access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in position.

If you can't reposition the hinges, you might require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. It is important to replace your seal as quickly as you can to keep your Upvc Window repair window waterproof and draughtproof.

upvc window repair handles can also become loose. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to shut the window and do an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and affect your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is important to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is more related to the seal, not the frame. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open, or if it opens with a breeze. These are easily replaced by any competent DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process but it can be easier to do with someone else to help hold the frame up.

Check that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue could be caused either by opening the window improperly or a faulty installation in the factory. Sending us a picture via our website will often resolve the problem. We are happy to provide assistance.

It is also important to grease the hinges on a regular basis. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using an oil that does not contain solvents, Upvc Window Repair such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, may become displaced, which causes gaps to develop where the sash meets the frame. If they are beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may also become misaligned, again it's possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window it is recommended to speak with a professional as soon as you can.