공지사항

Repairs to uPVC Windows

upvc window repair is an excellent choice for modern homes. They are durable, long-lasting and Double glazed window repairs near Me easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the replacement is usually able to fit into the old frame very easily. However, if windows with double glazed window repairs near me panes are secured by internal beading, it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need to source some plastic spacers that assist the new pane to fit perfectly into the window frame.

If you're planning to attempt to remove the window panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

Once the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and fix the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you may be interested in a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they are susceptible to a range of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can get to the frame. After that, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen up. This is often caused by screws that have become undone over time, but it can also be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The corner joints of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is essential to take action if you get up each morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. When it comes to uPVC repair, you must be careful not to over-caulk. This can make your window harder to clean and reduce its energy efficiency.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are another sign of water leakage. The is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like any mechanical part hinges will be damaged over time. Changing a window hinge is essentially a very simple process, but it's easier to do with someone else to help hold the frame up.

Make sure that the uPVC hinges open and close in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. This can often be resolved by sending us a picture via our website and we will be pleased to offer you advice.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become misaligned due to wear, creating gaps between the frame and sash. They can be repaired by giving them good clean, but in the event that they are beyond repair it could be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it is possible to just give them a clean but in some instances it could be necessary to have these replaced.

The next most common reason for draughts is window seals. They can become worn down or damaged over time and let air escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes which are filled with a kind of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

The windows made of upvc can remain a great source of insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than fix them. So, if you're having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.