공지사항

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it very hazardous and possibly fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace and upvc repair will usually fit into the frames that were previously in use very easily. However, if windows with double panes are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this instance it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

After the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues, including sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. It's important to take action immediately if you discover that your uPVC windows are sagging.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to open the windows to access the frame. With an screwdriver, take off the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window and verify the fitting. If you're satisfied with the fit, you can tighten the screws until they stay in place.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and draught-proof.

uPVC handles may also loosen. This is typically caused by screws that have been removed over time, but it can also be due to the handle mechanism getting worn out. It's fairly simple to fix a loose uPVC hand. First, you'll need to shut the window and do an experiment fitting. The corners of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also undermine your efforts to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the problem the old caulking might need to be removed before a new layer is applied. When it is time to uPVC repair, you must avoid over-caulking. This can make your window harder to clean and lower its energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme instances, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazing repair-glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in a breeze. They can be easily repaired by any DIYer who is skilled and can be done within a few minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It's easy to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or due to improper installation in the factory. This can often be resolved by sending us a photo via our website and we will be happy to give you advice.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window to operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window doctor near me.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges can also become misaligned due to wear, which can cause gaps between the frame and sash. These can be easily repaired by giving them good cleaning, but if they are beyond repair it might be necessary to get them aligned or replaced. The interlock may also become misaligned. It is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures and decrease the risk of draughts.

One of the most effective ways to cut down on drafts is to use an draught excluder. These are usually fabric tubes filled with some sort of filler and can be positioned on top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

With a bit of regular maintenance and repair your windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be cheaper to replace them rather than repair them. So, if you are experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.