공지사항

Window Repairs

Window repairs can help homeowners save money and help keep their homes comfortable. In the event of serious damages, like broken glass or a damaged frame, window replacement may be required.

However, many other issues can be addressed to extend the lifespan of your windows. Common problems include:

Cracked or Broken Panes

It's a rock that's been being tossed by your lawnmowers, or a tree's branch blown by strong winds, cracked window glass is not only unattractive but can lead to more expensive electricity bills because the broken pieces allow cold air to enter your home. Luckily, it's typically easy to repair windows that have cracked panes.

Begin by carefully removing glass with gloves and safety sunglasses. You may have to use a utility knife to remove old glazing compound or putty around the frame's edges. Next, wipe down the glass's surface and the frame's wood with a soft cloth or paper towel.

Once the area is clean, apply a waterproof silicone caulking on the perimeter of the frame. This will prevent water from leaking into the frame through the cracks and cause further damage.

A crack that is severe in double-paned glass may compromise the gas between the panes, which can make your windows less insulative. If the crack is so extensive that it is threatening the structural integrity of the window, or if the pane inside is not there, you may need to call an expert.

Cracks in the glass caused by thermal stress may occur when there is a significant temperature difference inside and outside your home. This causes the glass to expand and shrink. If this happens on two windows it's best to replace the window rather than trying to repair it.

Clear tape can be used to seal cracks in windows that are not yet ready for replacement. It can also keep out cold and bugs. You can cut the length of a nylon stocking to cover the entire crack and then glue it to the surface with duct tape. This is not an indefinite solution, but it can keep cold air out and insects away from your home. If you notice cracks on your older windows it is recommended to contact your local company to see whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a typical problem with windows. It can alter the appearance of a home and can also be danger to your safety. It is possible to repair the wood that has rotted. The first step is to make sure that the source of the rot has been addressed. Check for roof leaks and other places that water may get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done with the claw hammer, chisel or a rasp. After the areas that are rotten have been removed it is time to replace them with fresh wood. It is recommended to use pre-treated wood for this project since it will be resistant to decay. If you are not able to replace the timber that has rotted then you can use filler and wood hardener to reinforce the damaged area. This kind of product can be available at a majority of hardware stores. To achieve the best results, adhere to the instructions on the label.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. Apply a water-resistant sealant the wood. A product such as Sikkens is a good choice for this job.

You can also apply an epoxy filler that is two-part to protect the wood from further damage. This product is easy to apply and gives a good finish. It is crucial to follow the instructions on the label. When the epoxy filler is dry, you can sand down the wood's surface. Start with a rough sandpaper then move to an easier grade.

The final thing you want to do is make the rotted area even worse by expose it to more water. Therefore, it is a good idea to cover the area that has been repaired with an oil-based primer which will help protect it from moisture. After that, you are able to apply the waterproof wood sealant.

It won't open

The reason a window won't open can be caused by many factors. The house may have settled or the wooden frames could have warped during humid weather. Someone might have also nailed them shut for security. But with some patience and the right tools, all windows that are stuck can be opened.

Accumulated debris or gunk can be a major cause of a window not opening. Dirt and grime build up on the sliding tracks, hinges and locks over time, says Acme Glass. Additionally, hardware made of metal can rust when it comes into contact with humidity and direct sunlight. Spraying grease on these areas can help prevent oxidation, and keep your windows functioning properly.

Stuck windows may be the result of a loosening or Window Repairs breakage of the pulleys that are used to raise and lower the window. These parts can lose tension and become obstructed if they are located at least two floors higher than the surface.

If you're having trouble opening the window Try using a pry bar to gently push the window open a little at one time. Put a piece of wood on the frame to give your pry bar more leverage, and be careful not to damage the window or the wood. Alternatively, try running a hair dryer across the edges of the frame for several minutes to warm the wood and assist it to move more easily.

A faulty spring can also be the reason for windows that aren't able to raise or lower. Depending on the manufacturer of the windows, you'll be required to refer to the manual of your owner for additional instructions.

If you've tried cleaning the moving parts of your windows and lubricating them but they're still not opening it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows of your home go from being functional to unusable. If a window repairs near me isn't properly closed could expose your home to water damage and burglary. Contact our team for more information about our replacement windows and services today!