공지사항

Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is crucial to wash and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, you will need to find some plastic spacers that help the new pane to fit perfectly into the frame of the window.

If you are going to try to remove the glass panes yourself it is important to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you begin working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from getting into your home until a professional is able to repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you may think about a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window repair. As time passes, they may be affected by a variety of issues such as sliding. A sagging uPVC windows can cause problems with light, draughts, and even security. It's crucial to act when you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows so you can get at the frame. Then, remove both the hinges on the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, uPVC window repairs close your window and test it for fitting. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you aren't able to move the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have become undone over time, but it could be caused by the handle mechanism wears out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close your window and do an initial test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original position.

3. Water Leaks

It is important to take action if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks from windows are not just a cause for destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking might need to be removed before a fresh layer can be applied. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

Check that any drainage holes are free of debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows, Upvc Window Repairs it is more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and open with ease, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges will wear out over time. It's easy to change a window hinge, but it's easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine the direction in which the window repair near me should be opened.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you suggestions.

It is also important to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges may also become disaligned as a result of wear, which can cause gaps where the sash meets frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. Second, the interlock can be misaligned. It is located on the hinge's side and may need to be cleaned. In certain instances, it may be necessary to replace these.

The second most frequent reason for draughts are the window seals. They are susceptible to being worn out or damaged over time and let air escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glasses. This will help control indoor temperatures and decrease draughts.

Lastly, one of the most effective methods to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them instead of fixing them. If you encounter any issues with your upvc window you should consult an expert as soon as possible.