공지사항

Double Glazing Door Lock Repairs

Are you experiencing issues with your uPVC door or window mechanism not working properly? Maybe the window or door handles aren't aligned properly or are difficult to use.

It's important that your double-glazed doors operate smoothly, otherwise you'll be wasting energy and increase the chances of burglary. Owen the Locksmith will be able to repair your door lock at an affordable price.

Snapped Key

It can be frustrating when a key is snapped inside the lock. It can also be a security issue because it could make you vulnerable to an intruder if the door is not locked. There are a few quick fixes you can try to resolve the issue and make your door functional again.

First, remember to stay calm. If you get scared and start poking around wildly, you might just end up pushing the damaged piece of the key even further into the lock, thereby making the situation even more difficult.

Next spray WD-40 or a different penetrating oil into the lock to aid in making the broken piece slide out more easily. You can also employ a screwdriver in order to break up any pieces stuck that could be hindering the flow. If you have a chunk of the key stuck out then grab it using the help of a paperclip or any other thin metal object and pull it. Both methods work well, but be cautious not to push the broken piece of the key deeper into the keyway.

Some paperclips come with grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you do not have any of these handy, you can use needle-nose pliers that bend to create a hook. Also, a pair tweezers can be used to grasp and pull out the last part of the broken key.

If you are unable remove the broken key piece, use a lock deicer. This is usually found in most hardware stores, and it works by freezing any water or ice that could be inside the lock.

If none of these methods seem to be helping then it's probably time to call in locksmith. The experts at Fitlocks can quickly solve problems with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are easier to use. You can schedule repairs to your double-glazing online or contact us to discuss your requirements.

Broken Cylinder

A broken cylinder can be a serious security risk. It's a good thing that it's a simple repair for an expert locksmith to complete. To fix the cylinder, a locksmith will need to tap it. They can do this using the hammer or any other tools, but the most effective way is to make use of a long match or piece of wire. Then, position the match's tip or wire near the keyway. The locksmith will then hit the lock to break it. This is more secure than using a hammer that could harm the lock.

Overheating is the primary reason for cylinder heads to crack. This can occur when the block and cylinder head are made of various metals such as cast-iron and aluminium. When the different metals heat up and cool down at different rates, it can create hotspots in the local area that expand faster than the rest of the cylinder head, leading to cracks.

Another reason that could cause cylinder cracks is corrosion. If the head and block of a cylinder are not maintained properly, they can be corroded or rust and cause them to expand more than they would normally. As time passes, this may also lead to cracks.

If your uPVC window or door lock is brittle and requires a lot of pressure to turn, it could be due to a variety of causes. A faulty locking mechanism, misalignment or a worn handle are common reasons for this issue.

Fortunately it is a simple and cost-effective fix for the majority of homeowners with double glazing. A professional locksmith will usually solve the issue within one hour of arriving at the home. Depending on your needs they can change the locking mechanism, change the window handles, and also change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solutions for your home. They can even recommend upgrades to high-security 3 Star euro cylinders TS007 that add an extra layer of protection against burglars. This is a small price to pay for the peace of mind that comes from knowing that your uPVC doors are secure.

Broken Handle

It's not a surprise that window handle locks could break. They are equipped with complex mechanisms that become less effective over time. It isn't always easy to pinpoint the reason behind a broken window handle lock and fix it correctly.

Repairing your damaged handle, whether it's an internal latch or the locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. It can be expensive to repair or replace the handle in a way that isn't done correctly. It can also harm the frame and the lock of your door.

With the window open, loosen the screw that holds the handle using the screwdriver. It should be located on the inside face of the back plate, which is usually concealed by an attractive cover for the screw for aesthetic reasons. It is not recommended to lose any internal components of the handle such as the levers and plates on either side. Ideally, keep these in the same place so you can re-install them in the event of a need.

Then, turn the handle until it's 90 degrees to the window frame. Finally, loosen the screw on the back of the handle that fixes it to the internal spindle by using another screwdriver. Once the screw is released, you'll be able to pull the handle off and take off the damaged spindle. Replace this with a new one, making sure that it's the same length as the previous one (you will typically find them on the internet or at hardware stores) and screw it securely in the right place. Be careful not to tighten too much as this could damage the handle or the window doctor near Me frame.

Make sure the new handle is installed, then close and test the handle. The hope is that it will function smoothly and you'll be able to unlock your window.

Be sure to double-check that your uPVC window is shut correctly when you're working with the handle. If they're not closing properly cause damp and draughts inside your home, as and also affecting the energy efficiency of your home. A local window doctor near me company, such as Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they shut correctly.

Broken Spindle

It is usually the case that the spindle inside the handle breaks, rather than the handle itself. This is particularly frequent in uPVC tilt and turn windows. These types of windows require a handle which acts as a locking mechanism within the frame of the window. The handle is attached to a central rod which activates locks that are shaped like mushrooms and secure into the frame of the window keep. If the dead latch mechanism is not able to open when the handle is turned, it is likely that the spindle has been damaged, this can be a frustrating problem.

There are ways to fix this issue. A reputable locksmith will be able to quickly and effectively address this problem. A good locksmith will be able disassemble the handle of the window by using a tool that removes the wheel portion that houses the spindle. This is done without damaging the handle or window doctor near me causing other damage to the frame of the window.

After removing the wheel the technician can examine the spindle and identify the cause of the break. This involves breaking down the spindle into its individual components and carefully observing their general condition as well as any particular areas of wear or damage. This procedure is typically performed by technicians in a clean environment.

Next, clean the damaged spindle. This will help get rid of any dirt or other debris that may be obstructing it from working normally. Following this, the spindle can be repaired or replaced. If it is replaced, the technician will need a dowel of a similar size to the original and drill mating holes in both pieces of the spindle. This ensures that the new spindle is precisely matched to the handle.

If the spindle that is damaged is beyond repair, it could be required to replace it completely. Home centres sell generic substitutes, but if your window design is unique, you will have to speak with an expert in woodworking or cabinet making who can make the exact part. Once the new spindle is in place it can be fitted to the handle by lining up the screw holes on the handle with the frame's existing screws. Once the handle is firmly in place, you can use your uPVC windows.