공지사항

Choosing uPVC Replacement Window Handles

The majority of customers agree that Upvc replacement handles are simple to install and feel comfortable. However, it's important to know that the kind of handle you choose should be appropriate for your window.

The height of the step is the most important aspect. This is the distance between the handle and the base or frame. Other considerations include locking mechanisms and designs.

Replacement parts

You can purchase a range of replacement handles made of upvc. They are available in a variety of colours and styles so there's bound to be something to suit your existing windows. It's easy to make an impulse purchase particularly when the handle is damaged. It is therefore advisable to check a few things before purchasing an alternative. The first thing to think about is what type of upvc handle you currently have and fitting what the difference between types is. The table below shows the most popular handles to help you find the one that is suitable for your upvc windows.

Most double-glazed windows today have epag handles. They are typically attached to the frame by two screws which screw into the frame from both sides.

The spindle bar on the back could be of different sizes, and will determine if they are left-handed or right-handed. It is essential to know the measurements of the handle you currently have to ensure that you order the correct replacement.

Typically fixed by two bolts much like the Espag handle, but they have a low projection from the frame which means that the arm will not penetrate your blinds. This is an ideal choice when you have blinds on your windows made of upvc and you want to make sure the handle will blend in with the blinds.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge that rests on the frame of the window. This kind of handle can be typically used on older Upvc windows as well as on some wooden windows.

On casement windows, tilt and turn handles are operated by turning the handle or pressing on the top of the window. This lets you open the window from inside and clean it from outside without the need to climb a ladder or step across the fence. They're also a great option for those who have mobility issues, and can improve security and access in the home.

Tips and tricks

There are a number of different types of uPVC window handles, and a lot of people will have to replace them at some point. When this occurs it's best to know a few tips and tips that can help the job be as smooth as it can.

Find out what kind of handle is in your home. Depending on the type of handle and the locking mechanism, it may be necessary for you to replace the handle and lock. For example, if the shoot bolts (espag) and roller cams are seizing or jammed, you will need to change them, as well as the handle itself.

Thankfully, the majority of uPVC handles conform to industry standards and are similar. This makes replacing them a relatively easy process. First, you must remove the screw covers on the handles. These are usually pozidrive screws. After these screws are removed, you can then remove the handle.

If you've got the handle broken, it's an ideal idea to take note of how much of the spindle extends from the base of the handle. This will enable you to measure the spindle length for a replacement handle. To do this, measure the amount of the square peg that sticks out from the top of the handle, and use this as a guide.

This is particularly important for inline uPVC window handles as they are always straight and open from left or right, and won't operate in the middle. It is a good idea if you're not sure of the type of handle you have in your home to borrow a handle and check out how it functions.

You can also determine the handedness of a uPVC window by watching how the handle rotates when it is in use. Handles that are hand-operated will turn clockwise or counter-clockwise. If you're unsure, you can always have someone else open the window with the handle and figure out how it operates in that way.

Find the spindle's measurement.

Selecting the right replacement handle for your windows can be a challenge as there aren't all handles that are the same size. The spindle is the part that operates the locking mechanism inside the window. It is crucial that when fitting a new handle it is measured to the length of the spindle precisely to ensure that it will fit. There are several different types of uPVC window handles and they operate in different ways, so it is vital that you know what type of handle you have as well as the type of locking system you have.

The spindle of the handle extends out from the handle's rear and is attached to the lock gearbox inside the window frame. When you turn the handle, this will turn the lock inside the gearbox and opens the window. They are used on uPVC windows with casement and can be locked with keys to increase security.

Cockspur handles are typically found in older double-glazed uPVC window frames. They are characterized by an "nose", which closes over a wedge-shaped striker block. They are also simple and can be locked using keys. These handles are a little more difficult to find replacements for because they aren't as popular as the handles with a espagnolette.

If you have a tilt and turn uPVC window, then you'll require a specific type of uPVC replacement handle that comes with an additional locking mechanism. This will be able to open the window by tilting it, but also rotate it inwards and outwards to fully open it. It is essential to select an opening handle that has a spindle of at least 55mm in order to be able reach the window frame.

You can follow the same procedure to remove and replace window handles this kind of uPVC handle, but you'll need to be cautious when removing the old one. It might be necessary to open the window wider than usual to reach both screws that hold it to the frame. Once you have put in your new uPVC handles and verified that they are in the proper position, you can tighten up the screw covers and test to ensure the lock is working properly.

Fit the new handle

When you have the proper replacement handle it is easy to screw in place. It will require a screwdriver, and an electric one might be easier. It is essential not to overtighten the screws while screwing them into. This could cause the handle or knob to become warped.

Another important step to take when fitting the new handle is to install the spindle. The spindle is the component which runs through the handle to control the locking mechanism in the window. It is crucial that the component is properly fitted to permit the window to be opened and closed securely.

There are many different types of uPVC handles. There are several types of uPVC window pane replacement handles.

Espagnolette Handles - these are inline handles that can be used to tilt and turn windows to open the window.

Cranked Espagnolette Handles - these are similar to the inline handle however they have a curvaceous design that can be useful for windows that are difficult to reach.

Tilt and Turn Handles - these are used on tilt and turn windows to operate the closing and opening mechanisms.

These are the most common and the majority of uPVC windows have these in place. They are commonly called 'Bay Windows' in the UK.

It can be very frustrating if your uPVC handle breaks. But, there isn't a need to replace the entire uPVC window just because of a damaged handle. There are a number of simple steps you can take to repair or replace a broken uPVC window handle.

Fixing your broken window handle quickly by identifying the model and measuring the spindle. It is crucial to take your time and prioritise safety when working with windows or tools, but this is a relatively easy task. It could mean the difference between having a secure and secure home, or having a window that can be easily opened. If you have any questions or would like to speak with a professional regarding replacing your window handle, contact Bridgewater Glass. We have a team that is knowledgeable and experienced to assist you with any issue.