공지사항

How to Replace a UPVC Window Handle

If your window handle made of upvc is broken, don't panic. Replacing a window handle made from upvc is an easy task and can be completed in just a few steps.

No matter if it's an in-line or a crank espagnolette window handle, they all have a square spindle that protrudes out of the back plate. The spindle is slotted into the locking device.

Determine the type and size of the handle and lock.

Over time window handles and locks can get damaged or lose functionality. The good thing is that this issue can often be repaired without replacing the entire uPVC window unit. One of the first things to do is determine the type of handle and lock you have because this will help determine the replacement parts you'll need.

Identifying the kind of handle can be identified by looking at the base of the handle. There is the screw or pin that is holding the handle to its base. If the screw is not present, this can be an indication that the handle has split away from its base. If the handle is broken internally and isn't able to hold the spindle any longer It could also be a sign that the handle needs to be replaced.

There are many uPVC handles, but the Espag handle is the most popular. They are usually secured with two bolts and have spindles that are connected to the lock mechanism in the frame of the window. These handles are used on uPVC tilt and turn windows.

Cockspur handles are another kind of uPVC handle. They are similar to Espag handles, but they have lower projections from the frame. These handles are generally used on older uPVC windows.

There are also Venetian window handles, which are similar to the Espag handle, but have a flat base that allows them to be positioned in a flush position with the frame. These are a great choice for homeowners who want a stylish, elegant handle that will blend in with their uPVC window frames. They are also available in a broad variety of colors to match any style.

Find the spindle's measurement.

Before ordering a new handle, it's crucial to understand how the previous one is attached. This will determine how tight or loose it is and if it will fit correctly into the window frame. It is done by identifying what kind of handle you own and measuring the length of the spindle. The spindle is the steel shaft that connects the handle to the lock in the window frame. It's available in various sizes, double with the current industry standard being 8mm. Older handles might have a cross-section of 9mm, so you'll need to measure your old handle to ensure you get the right size replacement.

There are several types of window handles, however the most common are inline Espagnolette and the cockspur handle. They operate with a locking mechanism inside the window with shootbolt rods that lock the window when it is closed. Depending on the type of handle, they are held in place with pins or screws.

You can purchase Upvc handles that are replacement on the internet or in many DIY stores. They are available in various finishes, double and are suitable for windows that are new or replacement. They can also be key-locking or non-locking for extra security.

To take off the handle, simply open the window to the door and remove all the screws holding it in place. Place the screws in a container to avoid damage. Once the screws are removed, carefully remove the handle. Find the distance from the base of the spindle to its top. This will provide you with the information you need to buy the right replacement. The spindle of the handle is the iron shaft that connects it to a gearbox for locking in the window frame.

Remove the handle that was previously used

Changing the handle of a uPVC handle is a straightforward task that takes less than five minutes if you've got the appropriate tools. The first step is to identify the type of lock and handle, which will help you identify the right replacement. After that, weighing the spindle will help ensure that the new handle is a suitable fit. Finally, you'll need to take the handle off and replace it with the new one.

The majority of uPVC handles come with inline Espagnolette handles. These handles feature central spindles that slot into the locking mechanism on the window. They are usually easy to remove, however you may have to apply force to remove them if they're stuck. The handle is typically fixed by two screws that you can remove with a screwdriver. It is also possible to remove pins, based on the kind of handle.

After the screws have been removed After that, you can take off the handle. The top of the base plate should be visible when the handle is in the open position, showing two screws that you can remove. There's also a small silver or other colour sticker that has to be removed if in place.

It is now possible to screw into the new handle using the screws from the old handle. Make sure that the handle is in an open or locked position, then align the screw holes to the holes on the window. After you've done this, you can replace the caps on the screws and test the new handle to ensure that it works correctly. Changing a uPVC window can be a simple and quick task, but you need to ensure you do it correctly.

Replace the handle with a new one.

If you've been able to successfully remove the handle that you have on the frame, now is the time to fit your new handle. Begin by locating the screws and then removing them out with your screwdriver. Once the screw covers have been removed, store them in a safe place before proceeding to the next step.

Then, insert the new spindle into the handle by lining it up with the hole already in place and screwing it in. Make sure that the holes on the handle with those in the window frame. Make use of a screw of the same size as the previous.

uPVC Espag handles are fitted with a square 7mm spindle that rotates the lock mechanism fitted to the window. This type of handle can be present in the majority of modern uPVC windows. uPVC Cockspur (also called by the name Cotswold) handles feature an extended, curved nose that locks onto the frame's outer or cross member of the transom bar. They are often seen on older uPVC windows.

It is essential to lock and unlock the window numerous times after the handle has been installed. If everything goes according to plan, the new uPVC handle should be securely attached and working smoothly. If not, the steps above will help you identify any problems and fix it quickly. Bridgewater Glass can help you if you're having problems with your uPVC handles or other glazed home improvements. Our glaziers are trained to repair or replace a variety of window handles and frames which makes us a great choice for your double glazing needs.

Test the new handle

Over time and through normal use the uPVC locks and handles can suffer from damage and wear and tear. This can make them less secure and effective, so it's important to replace them as soon as you can. It's also a good idea to do when you are upgrading your windows. Changing your lock mechanism and handle will help maintain your new windows' integrity.

There are a variety of uPVC window handles. Some are fixed by pins or screws while others feature blades that slide into the lock mechanism. Each type has a different way to replace it, so you have to know what type you have.

Espag window handles are the most well-known kind, and are typically found on the latest uPVC windows. The spindle extends from the handle into the lock gearbox and triggers the locking mechanism when you open the window. They're also simple to remove, but you should be careful not to damage the mechanism or the handle when taking them off.

Cockspur window handles are a popular choice for uPVC windows. The locking mechanism is activated when the window handles replacement is closed or tilted. A spur attaches to the striker plates that are wedge-shaped on the frame. This type of handle is more difficult to fix than other kinds however, it's still a good choice for most homes.

Venetian handles are joined to the frame by two bolts and they have a low projection on the frame. This differs from the Espag handle. These handles are great for those who want to have a flush-fitting handle that blends into uPVC window frames. They are ideal for residential and commercial properties.