공지사항

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum or timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help avoid unnecessary repair costs and Window Repairs improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to make sure that your windows are in good condition.

Single-pane windows are fairly simple to replace and typically fit into old frames very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to source some plastic spacers that assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards fall onto the cloth rather than on the floor, where they could be trodden under and cause further damage.

It's a good idea to seal the gap after the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from gaining entry into your home. If the gap is particularly large, you might be interested in the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. Over time, they can be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action immediately if you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window which is sagging. To accomplish this, you'll need open the window to access the frame. With an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and check for fitting. If you are happy with the fit of your window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen up. Most often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has worn out. It's fairly simple to repair a loose uPVC handle. The first step is to close the window and then perform a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most common cause for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the caulking that was used up may require removal before a fresh layer can be put on. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window repair.

Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open with a breeze it could be hinges that are at fault. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Like any mechanical part, hinges can be damaged over time. It's easy to change a window hinge, but it's simpler if you have someone to help you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrow on each hinge, this shows which way the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or by poor installation at the factory. Sending us photos through our website can often resolve the problem. We are happy to provide assistance.

It is also essential to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication will help the window open and close more easily. It can also lower the possibility of a window getting stuck and stop corrosion. It is recommended to do this once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different things. The hinges, also due to wear and tear could become misaligned. This can cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it might be necessary to have them realigned. The interlock, which is on the hinge side of the window and can also become misaligned, again it is feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with low-emissivity glass, which will help regulate indoor temperatures, and also reduce the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on the windowsill on top. These will help to block out cold air and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional immediately.