공지사항

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good condition.

For single pane windows it can be relatively simple to replace them, and window repairs the replacement will generally fit within the frame of the previous one easily. However, if you have double glazing repairs-pane windows that are held in place by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea to seal the gap after the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap between the door repair and the window is significant, you may prefer security screens that has a window. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of issues like sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It's crucial to act when you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to reach the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you are unable to move the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could also be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close your window and do a test fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if you wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs (information from Telegra), you should not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage occurs between the double-glazed glass, it is more likely the issue is related to the seal, Window Repairs not the frame. Again this can easily be repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open in a breeze, it may be hinges that are at fault. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do with someone else to assist in holding the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. This can be done by checking for the arrows on each hinge. This indicates which way the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain way or due to improper installation in the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also important to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is an ideal method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. First, the hinges because of wear and tear, may become displaced, which will cause an opening to appear between the sash and the frame. This can be easily repaired by giving them a thorough clean, however when they're beyond repair, it could be necessary to have them re-aligned or replaced. The interlock may be unbalanced. This is located on the hinge side and may need to be cleaned. In some cases it is possible to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce draughts.

The final method to cut down on draughts effectively is by using a draught-excluder. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. However, it is important to recognize that windows last for a certain period of time and there may come the point when it's more efficient to replace them than fix them. If you are having issues with your upvc windows, it's best to seek professional assistance immediately.