공지사항

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and uPVC window repairs easy to maintain. In contrast to aluminium and timber, they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very hazardous and possibly fatal. It is important to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need find some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. This will also provide a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer security screens that includes a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from becoming worse.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows to access the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the size of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you might require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles could also become loose. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the loose uPVC window doctor handle yourself. You'll first need to close the window and do an initial fitting. The corners of the sash should align with the casing joint. If it doesn't then you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on how severe the problem is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and could reduce your energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases, uPVC window repairs you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is more with the seal rather than the frame. It is also possible to be corrected by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or if it opens in an ease. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Almost every household in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they will wear out over time. Changing a window hinge is an easy process, but it's easier to do with someone else to help hold the frame up.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either due to opening the window in the wrong way or by a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to give suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window replacement operate and close more easily. It can also lower the possibility of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges can also be misaligned due to wear, creating a gap where the sash and frame meet. These can be easily repaired by giving them a thorough clean, however when they're beyond repair, it might be necessary to get them realigned or replaced. Second, the interlock can be misaligned. This happens on the hinge's side, and may need to be cleaned. In some cases, it may be necessary to replace them.

These seals can wear down or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures, and reduce draughts.

Lastly, one of the most effective ways to cut down on draughts is by using a draught excluder, these are usually fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. So, if you are experiencing issues with your Upvc windows, it's recommended to seek assistance from a professional immediately.