공지사항

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

It is crucial to wash and oil UPVC windows and doors regularly. This will prevent unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to ensure that you are doing everything you can to ensure that your windows are in good condition.

For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If windows with double glazing repair panes are held together by internal beading, it is difficult to remove and replace the old panes. In this case, it is necessary to buy plastic spacers to aid in fitting the new pane into the window frame.

If you plan to attempt to remove the window panes by yourself it is crucial to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the fabric instead of onto the floor where they could be trampled upon and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and repair the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the distance between the window and the door is large, you might prefer a security screen that also has windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sagging. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it can also be caused by the handle mechanism wears out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need close the window and then perform a test fit. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a relatively easy fix that can be completed by any competent DIYer. Depending on the severity of the issue the caulking used previously may require removal before a new layer of caulk is applied. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and could reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage occurs between the double-glazed window doctor, it is more likely that the issue is more with the seal than the frame. This can be easily repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with ease, it may be hinges at fault. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is essentially a simple procedure, but it is easier to do with someone else to help hold the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrow on each hinge. This shows which way the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation at the factory. This issue can be fixed by sending us a photo through our website and we will be happy to give you advice.

It is also important to grease the hinges regularly. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also prevent corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of various factors. First, the hinges due to wear and tear could become misaligned. This can cause an opening to appear between the sash and the frame. They can be repaired by giving them good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. Second, the interlock can be disaligned. This is located on the hinge side and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common cause of draughts is the window seals, these can become worn down or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping will help to prevent draughts. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also lessen the risk of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide a great level of security and upvc Window Repairs insulation for your home. It is crucial to keep in mind that all windows will eventually wear out and it could be more cost-effective to replace them than to repair them. So, if you're having issues with your upvc windows, it is best to seek professional assistance immediately.