공지사항

UPVC Window Handle Replacement

Replacing a damaged or broken window handle is a relatively easy process, and, with the right tools, it can be done quite quickly. But it's essential to know your type of handle and the spindle length before buying an alternative.

Older uPVC window handles have a spur that protrudes and locks on the wedge striker. These can be either right or left-handed and have to be matched when replacing.

What kind of lock and handle do I need?

There are many different types of window handles made of upvc and locks, each with their particular advantages and uses. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism works as intended. As time passes and with regular use, upvc window handles are prone to wear or damage. out, making them less secure and effective. In some cases they may even fall completely off. If you find that your window handles have been removed, it's crucial to fix them as soon as you can. This will prevent possible break-ins and will keep your home secure.

It is a good thing that replacing your window handles made of upvc is a simple task that can be done by everyone. You'll need a few basic tools, but with right knowledge, it is simple and should take only a couple of minutes. You will need to know the type of lock or handle you have on your window. This will help you choose the right replacement.

Inline Espagnolette Handles

They are typically found on the outside of the window. They are flat in design and feature an opening that is connected to the locking mechanism of the frame of the window when it is turned. Inline upvc handles also come with a spindle that runs through the center of the handle, Upvc Window Handle Replacement and into the frame of the window to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles have one screw that holds the handle to the frame of the window and are not as secure as other kinds of window handles.

Handles that can tilt and turn

The tilt and turn handles are different from other handles made of upvc in that they can be rotated for opening the window, and then tilted to the window to let air circulate. They feature a 7mm spindle on the back and are available in right and left-handed versions.

It is essential to know the spindle's size prior to purchasing a double glazed replacement windows handles made of upvc. Not all are the exact same size. To determine the length of your upvc handle simply drop something in the middle of the hole and measure how far down it goes before it reaches an obstruction. This is the maximum spindle size that will fit in your windows.

What is the spindle?

uPVC window handles operate similar like doors, turning the handle to open an internal latch within the frame. This unlocks the window so that it can be shut and opened. But, at times, handles can be damaged, particularly when they are used frequently or exposed to extreme weather conditions. It is possible to replace the handles on your uPVC window if they are not functioning correctly.

There are a variety of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. This is why it is essential to know the kind of handle you have installed on your uPVC window to get the correct replacement for it.

The base of the handle will tell you what kind of uPVC it is. There should be a'snap in' cover over one screw that holds the handle base in place. Once you remove this and you'll be able to observe the second screw that holds the base of the handle in position. Once both screws have been removed, you should be able take the handle out of the uPVC.

Once you have removed your uPVC window handle, you will need to remove the old spindle from the locking mechanism. Make note of the length of the spindle as you'll need to make sure that you purchase a replacement that has the same length as the original handle and locking mechanism.

The spindle wears down and is unable to operate the locking mechanism. This can be due to wear and tear from continuous use or loosening of the locking mechanism, or even corrosion over time. If this happens, you will need to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I take off my old handle?

Window handles are susceptible to being damaged or even broken over the course of time. It is crucial to fix them as quickly a possible to ensure your security. It is easy to replace a worn or damaged handle. The job can be accomplished in under a minute without the need for special tools.

To remove the old handle, you must first remove the screw located at the base of the handle. Once the screw has been removed, the handle will be pulled away. A second screw will be located at the base of the handle. This can also be removed. Once these two screws are removed, the handle can be removed from the window's base.

Once the old handle is removed, grab the new handle and align the fixing holes with the holes that are currently in the window frame. There may be a little sticker or caps on the new handle, so take them off the caps if needed, and then screw the handle in its place. Once the handle is in place it is important to test that it works by turning the handle and ensuring that the lock mechanism is activated.

Espag handles come with an elongated spindle that extends from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross-member within the window.

Once you have installed the new handle, slide the spindle into the window lock and tighten it. When the handle is fixed in place then replace the snap-in cover and screw cap (if applicable). Now that the handle is ready for use, open and close the window a few times to make sure it is working properly and securely.

How do I put in the new handle?

The process of changing your window handle made of uPVC isn't difficult and the process is simple. All you need is a screwdriver, and a little bit of patience. The first thing you need to do is ensure that the old handle is in the unlocked position and then take out any screws that are visible, you can replace them by screw caps if you need. After removing the handle and you are ready to take a note of the length of the spindle that protrudes from the back of the handle. This is important because it will determine the type of handle you need to buy.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. The spindle is inserted into the handle to operate the locking mechanism inside the window frame. When the handle is turned it releases the latch on the window and allows it to open. In regular use and over time, handles for espagnolette may become damaged.

Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They have a protruding blade that operates a multipoint locking mechanism within the window. They are usually more secure than espagnolette handles as they can only be opened from the inside. They can be replaced using the same method as you would with espagnolette handles however, ensure that the new handle is not angled and flat.

Once you have selected the correct handle, simply align the new handle with the existing screw holes before screwing it into place. Then, put the screw covers on and test your new handle. This is done by shifting the handle from the locked position to the unlocked and then back to the locked position a few times. If you experience any issues, it may be worthwhile contacting a professional to see if they are able to assist you in solving the issue. They can often advise you on the best approach to resolve the issue in a quick and effective way.