공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the ghost immobiliser; http://capitolfederaldigital.com/__media__/js/netsoltrademark.php?d=wifidb.science%2Fwiki%2F5_Lessons_You_Can_Learn_From_Cost_Of_Ghost_Immobiliser,. This system is discreet & does not require additional key fobs in order to operate.

The device uses existing buttons on your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence up to 20 presses. This will then allow the start-up of your vehicle.

Simple PIN code Change Process

With the increasing rate of vehicle thefts, many owners are looking to upgrade their security. There are many types of security products that are available including tracking systems, alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. While a tracking system may help you find your car in the case of theft, it can not prevent the crime from occurring in the first instance. Immobilisers, however are exactly what they claim on the tin: they shut down the motor of your car to prevent it from being started. The Autowatch ghost ii immobiliser is one of the most advanced options available, making it virtually impossible for thieves steal your car.

The ghost device uses the buttons on your car to create an unique sequence that needs to be entered in order for the engine to begin. This can be done via the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This option is particularly useful if you need to hand your car over for valet parking or maintenance, as the immobiliser will still be activated, but not disabled.

The Ghost is a truly unique and ingenious device that works in conjunction with buttons on your vehicle rather than being a standalone device. This means that it's not just a powerful protection against theft of your vehicle, but it can also be transferred to any future vehicles you have, making it more of an investment than a traditional steering wheel lock.

Weatherproof, tiny device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your car from key hacking and cloning. It also stops ECU swapping. It is a tiny, weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure it is compatible with all vehicles. It also is resistant to jamming devices that are the most common method used by thieves to get around existing immobilisers.

The benefit of CAN data over conventional systems is that they operate silently. It's not detected by sophisticated RF scanning or code-grabbing technology and ghost immobiliser is also unrecognizable by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons on your vehicle, such as the steering wheel, centre console or door panels, to create a an unique sequence of disarming. You can even create a sequence that is up to 20 presses long for added security. The iPhone app only allows one connection, using the Ghost's unique pairing code. the ghost immobiliser 2. All communication between the two devices is protected.

The Ghost also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run if a valid PIN code has been entered. It is able to be operated temporarily in Valet/Service mode (with the appropriate parameters, like 30mph speed limit) which means you can give your car to valet or service without having to enter a code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device snoops on electronic signals to block your car's system from going through its normal initialization process until you enter an individual passcode. The system can be turned on or off through your smartphone's app, without the need for additional wires.

Standard factory immobilisers for vehicles function by using a transponder inside the key that sends an electronic signal to the ECU. The car will begin to start if the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser will not recognise it. This allows the vehicle be stolen and then started. The Ghost immobiliser was developed by an South African company at the forefront of vehicle security systems technology. It protects your car from hacking, key cloning and even key theft. Only by physically towing your car away from thieves could they steal it and not be able to drive it.

ghost immobiliser for sale uses buttons on your vehicle, such as the indicator stalk, steering wheel, and the door panels, to create unique PIN codes which must be entered in order to use your car. This is done without any additional hardware, ghost immobiliser like a keyfob. It can take up 20 to 20 presses. It is also undetectable by devices for diagnosis and transmits radio frequency signals, which means thieves cannot use sophisticated RF scanners or code-grabbing technologies to detect that the system has been set up.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves. It's more difficult to remove from a car alarm which requires disarming using a button sequence. This makes it a perfect supplement to a GPS tracker that can assist in locating your vehicle after it has been taken.

Override of emergency PIN code

You do not have to go far on social media to see stories or even videos of vehicles that were stolen by car thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow them to start your vehicle without the original key fobs.

Our Ghost immobiliser is designed to combat this and offer an additional layer of security in order to protect your vehicle from being targeted by thieves. It is created by creating an individual pin code push sequence from your buttons on the steering wheel, door panel, and centre console. The unique pin code is entered in conjunction with the original key fob to stop the engine from starting. The unique override pin can be found on the black card you will receive after installation. It's easy to remember because there aren't any LEDs.

The device is hidden in the vehicle's wiring and does not emit radio signals. This means it can't be detected using diagnostic software that can determine what is a ghost immobiliser type of security systems you have installed. This makes it a great alternative to the tracker.

In contrast to other security systems that use an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This enables them to shut down the vehicle completely with a digital block of commands that is sent to both the ECU and the engine.

These systems can also be connected to a separate analogue alarm, immobiliser or tracker. This should be decided prior to installation. They also work with valet and service modes, and are is a great alternative to a tracking device when you take your car to the dealer for an electrical issue.

Service/Valet Mode

In recent years there has been an rise in the number of vehicles being stolen with no owner's keys. It's easier than ever to steal your pride and joy with the availability of key cloning tools & door lock picks. We've developed the Autowatch ghost 2 immobiliser fitting near me Immobiliser to combat this. It blocks your car from being driven, even if your keys have been cloned.

It connects directly to your car's ECU (Engine Control Unit) through the data loop of CAN. It's completely silent since it doesn't use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also prevents the addition of an additional key or replacing the ECU to get around the system, since only the correct PIN code will allow the engine to start.

The device is hidden inside your vehicle and is accessed by existing buttons on your steering wheel, center console, and door panels. A unique and changeable PIN code sequence of up to 20 digits has to be entered before you are able to start your car.

This is the first aftermarket CAN-bus immobiliser for the market that has been created. It will prevent your vehicle from being driven or started in the event that you do not enter a PIN number first. If you're driving away with the device arming it will display an indicator on your dashboard and flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate just as normal. If you do not enter your PIN at this point the indicator will continue to flash and will require a new PIN every time you attempt to start your car.