공지사항

Ghost Immobiliser 2

Guards your vehicle from key cloning and prevents thieves from driving it with original keys. Our most recent immobiliser connects to the CAN data network in your vehicle and a unique pin must be entered to start the engine.

Ghost, unlike trackers, doesn't emit radio frequency signals and cannot be identified by diagnostic tools. Also, it doesn't have any LED indicators or buttons that can give the impression of its presence in your vehicle or van.

Anti-key Cloning

The ghost immobiliser was created to fight key hacking and cloning. The device is connected to your vehicle's data network CAN, and creates a unique pin code using the factory buttons on your dashboard and steering. This prevents the thief being able to start your vehicle. If the incorrect PIN is entered it will stop your engine from starting and making it impossible to leave with your joy and pride.

A ghost ii immobiliser immobiliser is a new technology that is extremely hard for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks which can be cut or jacked The ghost immobiliser is a discrete electronic device that isn't recognized by ordinary thieves because it doesn't emit radio signals and is completely silent.

This next-generation immobiliser can protect your vehicle from a range of threats, such as key-hacking, relay attacks and fit copied copies. It also has the ability to prevent thieves from adding a new key or replacing your ECU in the sense that it will not allow the car to start without entering the correct PIN code before entering.

Contrary to other immobilisers, the ghost immobiliser 2 does not require a key fobs or remotes to operate. It is deactivable using an app on the smartphone of the driver. This makes it ideal for the times you have to hand your car over for valet parking or maintenance without the key fobs.

The autowatch ghost immobiliser Ghost-II represents the latest evolution of Ghost's immobiliser. It is designed to be simple and easy to use and yet be as secure as it can be. This is done by integrating the Ghost-II into the vehicle's data network CAN, meaning that there aren't any additional wires that can be hidden or easily located. It also features an integrated feature that allows you to disable your Ghost-II by connecting to the vehicle's Bluetooth and you'll be able to go out and drive hassle free.

OBD port hacking

OBD port hacking is the newest method employed by professional auto thieves to steal cars. Thieves can access your vehicle's OBD port with little more than an laptop, an app, and a few cables, which can be purchased online for under PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they want including changing fault codes and tuning your car to taking your joy and pride away in under a minute.

If you have an Ghost immobiliser, it can prevent your car from being stolen using this method, by requiring that a unique PIN sequence is entered on your key fob in order to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. This is completely undetectable by any scanning technology, RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start with no PIN code.

You will also need a cable with OBD pins, which are connected to the CAN bus. These cables are available on eBay or Amazon for around PS50. You will also need cables with OBD pins that are connected to the CAN bus. These are available on eBay and Amazon for about PS50. The cable needs to be connected to the wiring harness of your car, like the radio wiring harness.

Once the hacker has established a connection to your vehicles OBD port, they can send diagnostics to the system at high baud rates which can cause CAN to crash and block systems in your car from functioning. This can cause the engine to stall, doors to lock and even the brakes to be engaged.

No additional key fobs or remotes required

A car immobiliser is excellent piece of anti-theft technology used by billions of modern vehicles around the globe. Using engine ECU software to prevent cars from starting if a fake transponder signal is detected by it, an aftermarket immobiliser is a great way to protect your vehicle.

It is possible for a criminal to know the code that disables an immobiliser, to disable it. The battery inside most key fobs can be removed by removing it, so a thief can make use of a simple tool to take out the immobiliser's circuit board and replace it with an empty. They will then be in a position to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished by a discrete and silent data loop in the CAN which is not detected by diagnostic tools, such as those used by high-tech thieves. It does not have a traditional keyfob with LED indicators, which means it's inaccessible.

There will be times where you have to disable Autowatch Ghost 2's automatic protection, for example during a valet parking or servicing. The ghost CAN immobiliser has a dedicated mode to do this, referred to 'Service Mode which is activated by pressing an app on your phone. The car can still be operated however, the maximum speed is limited to 36 mph.

Contact us today to set up an appointment to see our workshop. A member of the team will give you an in-depth explanation of the system's operation and provide you with your owner manuals, installation certification, Ghost 2 emergency card and a security guarantee.

Simple Change of PIN Code

ghost immobiliser fitting is the latest generation of device that protects your car without cutting wires or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network. A personal PIN can be set by pressing buttons on the dash and steering wheel. The device does not emit RF signals, therefore it is not able to be tampered with. This makes it undetectable by sophisticated scans using RF or code-grabbing technologies that modern thieves use.

The PIN code sequence can be changed anytime you want to lock out prior drivers, and it even has an override option in the event of forgotten sequences. The installer will show you the procedure to accomplish this during installation. The system comes with a valet-mode feature that can be used to temporarily disable pin input sequences so that your garage or mechanic can work on the vehicle without knowing the pin number. This is great for customers who wish to surrender their vehicle for valet parking / service but don't want to divulge the pin sequence.

Contrary to Thatcham products that require additional key-fobs in order to operate, Ghost is a discreet system which takes advantage of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. This sequence is entered through the app on your smartphone. There are no additional LED indicators are thrown, and your car is protected without chance of being disabled.

Every vehicle is tested

Ghost immobilisers, unlike key fobs that require pressing buttons, 175.215.117.130 is discreetly placed under the dash or steering wheel. It is not obvious that it's there. The device is connected to your vehicle's CAN network, and a PIN code can be programmed using the buttons on your vehicle. The system then prevents the engine from starting until the code has been entered prior to. This means that thieves are unable to duplicate the keys on your car or gain access to the OBD port to hack your vehicle.

Ghost is a great option for all vehicles that use electric vehicles motorhomes, vans, and bikes. It is also extremely versatile and can be set to disable in a variety of situations. For instance, it can be programmed to go into Valet mode when the vehicle is being taken to a valet parking or service company. This permits you to drive within a speed limit of 30 mph, and the ghost immobiliser will activate itself when your vehicle is returned to your possession.

The device can be reset at anytime to your personal PIN number. This is a great option if you lose the code, or when the device ceases to function.

It is also inaccessible to anyone who doesn't even know what it is. It does this by running through the buttons on your dashboard and steering wheel and then using the information it sends to identify which button was activated. This makes it a safe and reliable security system that cannot be tampered by RF scanning, jamming, or door lock pick set.