공지사항

Ghost 2 Immobiliser Problems

Created to guard vehicles from key cloning and hacking to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that can be installed without damaging your vehicle. It prevents your vehicle from starting unless you press an exact sequence of keys within your vehicle, similar to the password of a mobile phone.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by preventing the engine from running until it has received the correct PIN code. This is done without modifying the vehicle, and is undetectable by thieves. The unit connects directly to the ECU via the CAN databus to immobilise a vehicle. This is similar to the one used by car makers for years. However, thieves are unable to escape it using a new key or key relay technology, like they can using factory-installed systems.

Ghost Ghost can be fitted to any van, car, motorhome, caravan or bike with an engine. It is compatible with all major brands of vehicles. The same system can also be utilized on electric vehicles. It is an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from starting unless a PIN code has been entered before. You can enter the code manually or through the Android or Apple app. If the wrong code is entered, the app will show an indicator light. The Ghost will not let the vehicle to be restarted. This is a great way to deter thieves. If the vehicle can't be started, they will move on.

The ghost vehicle immobiliser is a weatherproof small device that can be tucked away in the most difficult to access areas of your vehicle. Installation takes between 20 and 30 minutes for each vehicle. It is also simple to remove if you decide to change vehicles, or give it to an auto repair shop or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognized by a number of insurance companies. It is also equipped with a safe emergency Pin Code override and features the Service/Valet Mode which can be activated using a button on the app or using your key fob.

Disarm

Ghost immobilisers are not mechanical devices to prevent theft that can be removed, are concealed inside the vehicle. They are near impossible to bypass or hack and, even if they are discovered, thieves cannot start the engine. A ghost immobiliser is protected from key cloning and signal jamming and devices spoofing. These are the methods thieves employ to gain access into cars with standard immobilisers.

An immobiliser works by sending a code to the ECU (electronic control unit). If the wrong code has been received and the vehicle does not start because the engine will not start. It is possible to disable a ghost vehicle immobiliser immobiliser with an application program, but it's extremely difficult and time-consuming to accomplish this. The software can only be installed and operated by a authorised installer.

The Ghost immobiliser is a small system that sits within the wiring loom of the vehicle and is invisible to the naked eye after it has been installed. It is not visible on diagnostic systems. There are no indicators with LEDs, and it isn't able to communicate with the engine through the OBD port. It communicates in silence through the CAN data loop.

The system will prevent the vehicle from starting unless it is given a specific PIN code sequence. The code is entered by pressing buttons on the steering wheels or door panels, or centre console. This is a much safer way to protect your car since it doesn't require the use of keys or a remote control.

Ghost also has a service-mode that is activated through the mobile application. This allows you to give your keys to someone else for valet parking or service, without needing to enter the disarm sequence.

You should not remove the system on your Ghost yourself, regardless of whether it is in service mode. This could cause damage to your engine. It is recommended to speak with an TASSA-certified installer who can safely and correctly remove the system. Our most recent GHOST immobilisers have a specific fingerprint QR sticker that is hidden in different parts of your vehicle. These are linked to our security register. If the system is removed and then sold on the black market it will be able to trace the owner of the system.

Anti-Hijack

The anti-hijack function is an essential feature of the Ghost Immobiliser 2. It functions like an intelligent key and is one of the most secure methods to ensure your car is safe from theft. If the ignition switch is turned to on, and the car is stationary for a period of 30 seconds, the ghost immobiliser installer system will automatically stop the engine and turn on the warning lights on. This gives the driver or passenger time to press a hidden security button (depending on the vehicle) before the system is activated and the engine is again allowed to start.

In contrast to other systems that simply stall the engine whenever the ignition is switched to on, the Ghost system uses a special controller and timer unit which will shut off the valve that cuts off fuel in the event that it is activated within an agreed-upon time even if the ignition is still turned on! The delay time frame must be sufficiently long to allow the victim of the vehicle to move away from the scene of the hijacking and a sufficient distance from the vehicle that is stalled before the system can be activated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an additional level of security that prevents common hacking techniques employed to gain access how much is a ghost immobiliser To Fit A Ghost Immobiliser - Sun-Clinic.Co.Il, modern vehicles, such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a silent way and does not emit signals that could be picked by a thief using codes-grabbing or RF scanning technology.

The Ghost system also comes with the Service/Valet mode that allows your vehicle to be started temporarily and driven without the need for an PIN code. This is great when you park your vehicle and only need to leave it for a brief time, such as to open the garage door or place groceries in the boot. The system will exit service mode according to speed and duration or via the simple PIN code input process and give you security knowing that only YOU are able to use your vehicle!

Keyless Entry

With the rise of theft of cars using contactless technology, many people are considering additional security options. This is particularly applicable to those who have put in time and money to customise their vehicles or own expensive cars. An add-on immobiliser can be an effective way to avoid this type of theft as it can prevent your vehicle from starting unless the correct pin code is entered into your key fob.

Immobilisers are designed to intercept various vehicle circuits such as those that control the starter motor and the fuel pump. They also are able to shut the car alarm to draw attention and deter any potential thieves.

These devices communicate directly with the engine control unit via the CAN data network. They prevent the thief from bypassing it by installing a replacement ECU or using key programmers. These immobilisers are installed in a discreet manner inside your vehicle, leaving no trace and are completely undetectable by the tools that high-tech thieves employ.

As opposed to other systems that require a separate app, or a tag to be worn on the person carrying it the Ghost immobiliser can only be disarmed by pressing a sequence of existing electronic buttons on your steering wheel, door panel and central console, allowing you to choose a personal pin sequence. The pin can be changed as often as you'd like, meaning it is as secure as a credit card. It can be more difficult to break due to it requiring at least 20 presses.

Ghost also comes with the Valet/Service mode, which allows you to deactivate the system when your vehicle is going to be handed over for valet parking or service which allows it to operate within predetermined parameters, like a 30mph speed limit and you don't have to worry about your car being driven recklessly. It is then reactivated by using the original key or corresponding entry code.

Installed by our certified installers It is the most secure and efficient aftermarket CAN-immobiliser on the market. It is also approved by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels and How to Fit a Ghost Immobiliser an ISR contact card that contains the unique QR codes as well as an emergency code that is safe. They are all stored in your wallet or purse.