공지사항

Protect Your Pride And Joy With The ghost immobiliser birmingham Immobiliser

Guard your precious possessions from theft by using the Ghost Immobiliser. This system is discrete and doesn't require additional key fobs to operate.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be altered up to 20 times. This then authorizes the vehicle to start.

Simple process to change the PIN code

Many owners are upgrading their security because of the rising number of vehicle thefts. There are a myriad of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However they do not all are equally effective in protecting your car. While a tracking system can assist you in locating your car in the event of theft, it does not stop the crime from occurring in the first in the first place. Immobilisers, on the contrary, do exactly what they say on the tin: they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to steal your vehicle.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be accomplished using the indicator stalk or window buttons. In addition, there is also a mobile app which acts as an emergency PIN code override, allowing the driver to operate the car without the button sequence. This option is particularly beneficial if you have to surrender your car for valet parking or maintenance, as the immobiliser will remain activated, but not disabled.

The Ghost is a unique and innovative device which is used in conjunction with the buttons of your car instead of being a separate device. It's not just an effective deterrent to theft of your vehicle, but it can be used to secure any future vehicles you own. This makes it a far more cost-effective option than a traditional wheel lock.

Small device that is weatherproof

The Autowatch ghost immobiliser is a sophisticated security system that protects your car from key cloning, hacking & ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU via the CAN data bus to shut down the engine. It can be placed in the vehicle without the need for extra wiring, and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices that are a popular technique used by thieves to bypass immobilisers.

The advantage of using CAN data is that it operates silently compared to traditional systems. It can't be detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, like the steering wheel, centre console, or door panels, to create a unique disarming sequence. You can make this sequence as long as 20 presses to increase security. The iPhone app is limited to one connection, and comes with a unique pairing code for the Ghost. All communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU to bypass the immobiliser. The engine will only start when a valid PIN code has been entered. It can also be put in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) to allow you to give your car to a valet service or for maintenance without having to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects signals to prevent your car from starting normally until you enter a specific code. The system can be activated or deactivated by using your smartphone's application without the need for Ghost Immobiliser For Sale wires.

The standard factory immobilisers function by using a transponder that is built into the key. This transmits a signal to the ECU. If the correct code is transmitted the car will start however if the transponder is swapped with one from another vehicle the immobiliser will not recognise it. This allows the vehicle be stolen and then started. The ghost immobiliser fitting near me immobiliser for sale (auburn-sunflower-fhb7mb.mystrikingly.com) immobiliser was developed by an South African company at the top of the line in vehicle security technology. It shields you from hacking or key cloning, and even key theft. The only way a thief could steal your vehicle is physically towing it away and even then, they would not be allowed to drive it.

Ghost makes use of buttons on your vehicle, like the indicator stalk, steering wheel, and the door panels, to generate unique PIN codes that must be entered in order to use your vehicle. It does this without additional hardware, like key fobs. It can take up to 20 presses. It is also unrecognizable by diagnostic equipment and does transmit radio frequency signals, which means thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Ghost is more difficult to get rid of than car alarms, which require disarming by pressing the buttons. This makes it a perfect supplement to a GPS tracker which helps locate your car after it has been taken.

Override of emergency PIN code

You don't have to look very far on social media to find stories or videos about cars that were stolen using the most advanced technology tools. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

Our Ghost immobiliser combats this and provides you with an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It generates a unique pin code when pressing the buttons on your steering wheel, door panel and the centre console. This unique PIN is entered alongside your original key fob in order to prevent the engine from starting. The unique override PIN can be found on the black card that you will receive after installation and is easy to remember since there are no LED indications.

The device is hidden in the wiring of the vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can determine what type of security systems you have installed. This makes it a fantastic alternative to the tracking device.

Unlike other security systems, which use a relay in engine bays, CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely with an electronic block of commands for both the ECU and the engine.

They can also be connected to an analog alarm immobiliser or tracker. This should be specified prior to the installation. They are also compatible with valet and service modes, and are is a great alternative to a tracker device when you take your car to the dealer for an electrical problem.

Service/Valet mode

In recent years there has been an increase in vehicles that are stolen without owners' keys. It is easier than ever before to take your joy and pride thanks to the availability of key cloning tools & door lock picks. We have developed the autowatch ghost immobiliser fitting ghost immobiliser fitting Immobiliser to combat this. It stops your car from being driven, even if your keys have been cloned.

It directly communicates with your cars ECU (Engine Control Unit) via the CAN data circuit. It is completely silent, as it does not use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also protects you from introducing the new ECU or key to circumvent the system, as only the PIN code allows the engine to start.

The device is concealed inside your car, using buttons on the steering wheel, the centre console and door panels. Before you can begin your car, you must enter a unique, changeable PIN number that is up to 20 numbers.

This is the first aftermarket CAN-bus immobiliser that was designed. It will stop your vehicle from being started or driven in the event that you do not enter a PIN code before entering. If you're driving away with the device arming the indicator will flash on your dashboard which will flash continuously for about 300m. Entering your PIN code will turn off the anti-hijack. Your car will continue to run normally. If you don't enter your PIN at this point, the indicator will continue to flash and will require a new PIN code each time you attempt to start your car.