공지사항

How to Change a Subaru Spare Key

Call a locksmith if you have lost your Subaru key. Usually, they will cut an alternative key for you at a lower cost than the dealer.

Subaru car keys are usually either intelligent "push-to-start" fob remote keys or simple metal keys. The Fob key comes with an embedded chip and will need to be reprogrammed.

Keyless Entry System

The key fob can be used to lock and unlock your subaru replacement keys remotely. It also opens the trunk of your car or the lift gate. These remotes function with keys inside your car to communicate with the computer system inside the vehicle.

Certain models of Subaru come with a lesser-known feature called PIN Code Access. You can utilize a personalized number sequence to start and open your car. Check your owner's guide to learn how to use this feature if you own a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.

If your keys stop working, there's a high possibility that the battery inside the key fob is dead. You can test the battery life of your key fob with an instrument that is portable or a multimeter that you have in your garage.

The next step is to remove the circuit board of the transmitter from the key fob and then examine it. It will have one or two sets of 8-digit numbers, so note down the first set so you can recall it later. After you've completed that then put the key fob back together and you'll be able to begin programming it at home. The procedure to do this will vary based on the type and year of your car but it's generally simple enough to complete yourself.

Key Fobs

subaru car keys replacement's latest models come with key fobs that don't just unlock doors, but also turn on lights, lock gas cap and even start the car. This feature is especially useful if you have ever been at a gas station and your car won't even start because the battery inside the key fob is dead.

It doesn't matter if your Subaru is old or new, it's likely that the key fob can be replaced with no difficulty. It's important that you remember that models with an advanced level of technological sophistication may require a trip to the dealership. With little effort and some time, you can create your own key fob replacement.

Start by opening the case and inspecting the circuit board of the transmitter. (Instructions on opening the case are usually included in the owner's guide). There should be two or more serial numbers with 8 digits each. Write down the number that is the first in the series and keep it in your wallet to refer to later on.

Then, you'll need to get into the driver's seat, and close all the doors. Turn the key to start your vehicle and then shut off after 10 turns. Press the lock button on your key fob, and then open the door. This will confirm whether your doors are operating correctly. Then close the door and take the key out of the ignition. You should hear your car chime again, Subaru Car Keys indicating that the key fob is programmed.

Ignition System

The key battery could be dead if your Subaru keys aren't functioning as they should. You can replace the key fob battery on your own if are familiar with the procedure. A replacement battery is not expensive and relatively easy to locate. If the key fob you have doesn't respond to your commands, there could be a different issue. It's recommended that you visit a dealership to purchase an extra key. They can ensure that the key is an original Subaru key, which is covered under warranty, and is programmed to your vehicle. This is far more secure and less expensive than purchasing an aftermarket key from a retailer via the internet.

You can also ask the dealer cut a new key if you provide them with your VIN and proof of ownership. This information will be used to identify the key replacement to ensure that it is recognized by your immobilizer. This process is more complex than simply cutting a key, and the dealership will usually charge more for this service.

After the new key has been programmed and you're able to swap it with your current key. It takes just five seconds to insert the new key, so be sure to keep your working key close at the ready. You can remove the key after the security light stopped flashing, and then test it.

Battery Replacement

One of the most important features that makes Subaru fobs so valuable is their ability to turn on your car's power windows as well as sunroof at the touch of a button. However, the battery that is in your Subaru key fob was not intended to last forever, and will eventually need to be replaced. This quick guide from Capitol Subaru will help you to replace the battery yourself.

First, you'll need to locate the tiny crevice that divides the front from the back of your keyfob. You can then open the gap using the flat-head screwdriver, which will reveal the small compartment that houses the battery. Insert the new battery and ensure it is facing the right way. Remove the old one. Once you've assembled everything, you can use the new key fob to lock the vehicle, unlocking it, and then starting your vehicle.

It's always best to have an additional set of keys available particularly if you've lost one or not working properly. A new key can be bought at your local auto dealer, or you can have one made by locksmiths. In either case, it's vital to get your key fob functioning properly as soon as you can to allow you to drive safely!