공지사항

Ghost Immobiliser 2

Secures your vehicle from key cloning and stops thieves from driving the vehicle using original keys. Our most recent immobiliser connects to the CAN data network in your vehicle and a unique pin must be entered in order to start the engine.

In contrast to trackers, Ghost does not transmit any radio frequency signals and cannot be detected using diagnostics tools. Ghost doesn't have LED indicators or buttons to indicate its presence in your car or van.

Anti-key Cloning

The ghost immobiliser is created to fight key cloning and hacking. The device connects to the CAN data network of your vehicle and creates an unique pin code sequence that is activated by pressing the buttons that are factory-installed on your dashboard and the steering wheel. This prevents the thief being able to start your vehicle. If the incorrect PIN is entered it will stop the engine from starting which makes it impossible to leave with your pride and Joy.

A ghost immobiliser is a new technology that is extremely hard for thieves to beat. The ghost immobiliser unlike physical deterrents, such as wheel locks and steering locks that can be cut, is a discrete electronic device. It's not even detected by thieves because it emits no radio signals and operates silently.

The next-generation immobiliser protects your car against a variety of threats, including key-hacking relay attacks, key-hacking, and cloned copies. It also has the ability to stop the thief from adding a new key or replacing your ECU by ensuring that it does not allow the vehicle to start without entering the correct PIN code first.

The ghost immobiliser 2 unlike other immobilisers does not require an external remote or key fob to operate. It can be deactivated via the driver's mobile by using a simple app. This is ideal for those times when you have to give your car over to valet parking or maintenance without the key fobs.

The Autowatch Ghost-II represents the latest version of the Ghost's immobiliser. It is designed to be as easy and easy to use as is possible, yet remains as secure as ever. This is accomplished by integrating the Ghost-II into the vehicle's data network CAN, https://www.Boris.icu/ (Golflab.tk.Ac.kr) which means there are no additional wires that can be hidden or easily located. It comes with an inbuilt feature that allows you to disarm the Ghost-II simply by connecting to your vehicle's Bluetooth.

OBD port hacking

OBD port hacking is the latest method being used by professional car thieves to steal vehicles. Thieves have access to your vehicle's OBD by using the help of a laptop, mobile application, and a few cables that are available online for less than PS50. Once they have access to your vehicle's OBD port, they are able to do whatever they like, from changing fault codes and tuning your car to taking your joy and pride away in just a few seconds.

If you have a Ghost immobiliser fitted it can prevent your car from being stolen using this method by making sure that an unique PIN code sequence is entered on your key fob to start the engine and drive away. It communicates with the vehicle's ECU (Engine Control Unit), using the CAN Data Circuit. It is not detected by any scanners for RF or code grabbing. It comes with a Service/Valet mode that allows your vehicle to start with no PIN code.

To utilize an OBD hacking device you need to have an operating system that is capable of interpreting the OBD protocol, which can be bought for less than PS100 on eBay or Amazon. You'll also require a cable with OBD pins which are connected to the CAN bus. These can be found on Amazon/Ebay for around PS50. Then, you need to splice the cable into the wiring harness of your vehicle, for example, in the radio wiring harness.

Once the hacker has gained a connection to your vehicles OBD port, they will send diagnostics to the system at a high baud rate that can crash the CAN and block systems in your car from working. This could cause your car's engine to stall or even stop working.

No additional key fobs or remotes are required.

A car immobiliser is a great piece of anti theft technology that is used by billions of modern cars all over the world. Using engine ECU software to prevent cars from beginning if a false transponder signal is sent to it an aftermarket immobiliser is a great way to protect your vehicle.

It is possible for a thief to know the code to deactivate an immobiliser, and bypass it. A thief could easily remove the battery from many key fobs by squeezing them open. They could then employ a simple tool in order to remove the internal circuit board of an immobiliser and replace it with blank. Then they will be in a position to start your vehicle.

The TASSA approved Ghost 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser is directly connected to the vehicle's ECU (Engine Control Unit). This is accomplished via a discrete, quiet data loop in CAN that is not detected by diagnostic tools, such as those used by high tech thieves. It also does not make use of a traditional key-fob that has LED indicators, meaning it can go undetected at sight.

You may need to deactivate Autowatch's Ghost 2 automatic protection at times like valet parking or a service. The ghost CAN immobiliser has a special mode to do this, referred to 'Service Mode that can be activated with the touch of a button on your smartphone. The car is still operational, but the maximum speed is restricted to 36mph.

Contact us today to set up an appointment to see our workshop. A member of the team will run through the entire process of the process and provide you with your owner manuals, installation certification, Ghost 2 emergency card and security assurance.

Simple process to change the PIN code

Ghost is a next generation device that can secure your vehicle without cutting wires or installing aftermarket key fobs. It connects directly with the vehicle's CAN data network. A personalised PIN can be programmed using buttons on the dash and steering wheel. The system stops engine start and can't be bypassed because no RF signals are emitted from the device. This makes it undetectable by sophisticated RF scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be altered whenever you want to block previous drivers. It even comes with an override code incase of a sequence that is not remembered. The installer will guide you through the procedure to accomplish this during installation. The system also includes the option of a valet mode that can be used to temporarily disable the pin input sequence so that your mechanic or garage can fix the car without needing to know the pin code. This is a great choice for those who do not want their PIN sequence to be disclosed, but wish to leave their car with valet parking or Boris.Icu (Yvonne-elodie.de) service.

Ghost is a discrete system that uses the buttons on your car to create a unique and interchangeable PIN sequence. This sequence is entered through the app on your smartphone. No additional LED indicators are thrown, and your vehicle is secured without possibility of being disabled.

Tested for each vehicle

In contrast to key fobs that require you to press buttons and a ghost immobiliser can be hidden under your dash or steering wheel to make sure you are unaware it's there. The device is connected to your vehicle's CAN data network and a personalised PIN code is programmed into it by using the buttons already on your car. The system won't permit your vehicle to start until this code is entered. This means that thieves can't clone the keys of your car or Www.Boris.Icu (Https://Acessy.Wiki/Index.Php/The_No._One_Question_That_Everyone_Working_In_Ghost_Immobiliser_Fitting_Near_Me_Should_Be_Able_To_Answer) access the OBD to hack into it.

Ghost is a feature that can be found in any vehicle, including electric cars, vans motorhomes, and bikes. It's also extremely versatile and pop over to this site can be programmed to turn off in a variety of situations. For instance, it could be set to enter Valet mode when the car is taken to a valet park or service company. This allows you to drive within a 30mph speed limit, and the ghost immobiliser will start to activate itself when your vehicle returns to your possession.

Another great feature is that the device can be reset to the personalized PIN at any time. This is beneficial if you forget the code or the device is inoperable and is like new.

The device is also completely inaccessible to anyone who doesn't know about it is. It does this by analyzing the buttons on your steering wheel and dashboard and then using the information it sends to identify the exact button that was activated. This makes it a secure and reliable security option that can't be tampered with by jamming, RF scanning, or door lock pick sets.