공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the ghost immobiliser problems Immobiliser. This system is discreet & doesn't require additional key fobs in order to operate.

The device makes use of buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will then allow the startup of your vehicle.

Simple PIN code Change Process

With the rising rate of vehicle theft, a lot of owners are looking to upgrade their security. There are a myriad of security devices that are sold aftermarket including tracking systems, alarms and immobilisers. They're not all equally effective in protecting your vehicle. While a tracking system can assist you in locating your vehicle in the event of theft, it will not stop the crime from happening in the first place. Immobilisers, on the contrary, do exactly what they claim on the tin: they shut off your car's engine to prevent it from being started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to generate a unique sequence that must be entered to allow the engine to start. This can be done using the indicator stalk windows or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is especially useful when you need to hand your car over to a valet service or parking, as the immobiliser will still be activated and not disabled.

The Ghost is an innovative and unique device that works by using the buttons on your vehicle rather than as a standalone device. This means it's not just a highly effective security measure against theft from your vehicle but it can also be transferred to any future vehicles you may own, making it much more of an investment than traditional steering wheel locks.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your car from key cloning and hacking. It also prevents ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to stop the motor. It can be installed in the vehicle without additional wiring and Ghost Immobiliser Review has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are the most common method used by thieves to get around the immobilisers in place.

The benefit of CAN data over traditional systems is that they work silently. It's not detected by sophisticated RF scanning or code-grabbing technology and is likewise unreadable by conventional diagnostic tools. The Autowatch ghost doesn't emit LEDs, but instead utilizes the buttons inside your vehicle, such as the steering wheel, centre console or door panels to create a unique, programmable disarm sequence. This sequence can be extended 20 or more presses to provide additional security. The iPhone app permits one, authorized connection with the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost stops car thieves from adding an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine will only run only if a valid PIN is entered. It is possible to operate temporarily in the Valet/Service mode (with parameters set such as 30mph speed limit) and, therefore, you can give your car ghost immobiliser to valet or Ghost Immobiliser Review service without entering a code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to disable your car's system from performing its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated through your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder, which is embedded in the key. This sends a message to the ECU. If the correct code is transmitted the car will begin, but if a transponder is swapped with one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle be started and stolen. The Ghost immobiliser was developed by an South African company at the top of security systems for vehicles technology. It shields your pride and joy from hacking, key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away and even then they would not be capable of driving it.

Ghost makes use of buttons in your vehicle, like the indicator stalk, the steering wheel, and door panels, to create unique PIN codes that must be entered in order to use your car. This is performed without the need for additional hardware, such as key fobs and can be as long as 20 presses long. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code-grabbing technologies to identify that an installation has been made.

Ghost is more difficult to get rid of than car alarms that require disarming using a series of buttons. This makes it an excellent complement to a GPS tracking device, which can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You don't have to look very long on social media sites to find stories or videos of vehicles that have been stolen using the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original key fobs.

Our Ghost immobiliser is designed to combat this, and give you an extra layer of security to keep your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel and centre console. The unique pin code is entered along with your original key fob to prevent the engine from beginning. The unique override pin can be found on a black card that you receive following the installation. It is easy to remember because there aren't any LED indicators.

The device is hidden inside the vehicle's wires, and doesn't emit any radio signals, which means it can't be detected by modern criminals using diagnostic software that is able to recognise what type of security system you have installed. This makes it a great alternative to an alarm.

Contrary to other security systems that rely on a relay located in the engine bay, these CANBUS immobilisers communicate via CAN databus (brand dependent) with the ECU and BCM of the vehicle. This enables them to shut down the vehicle completely by sending an electronic block of commands for both the ECU and the engine.

These systems can also be linked to a separate alarm immobiliser or tracker. This must be specified prior to installation. They are also fully service/valet mode compatible and a great alternative to a tracker if you are you have your car checked for an electrical fault at the dealers.

Service/Valet mode

In recent times there has been an increase in the number of vehicles that are stolen without owners' keys. It's now more easy than ever to steal your pride & joy due to the availability of key cloning devices and door lock picks. To stop this, we have launched the Autowatch ghost immobiliser installation Immobiliser Review; Https://Carghostimmobiliser97631.Tinyblogging.Com, immobiliser that prevents your vehicle from being driven despite the fact that your keys have been copied or your vehicle has been stolen.

It communicates directly to your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects against adding the key to a new one or replacing the ECU to get around the system since only the correct PIN code can allow the engine to start.

The device is hidden in your car and is accessible via buttons on your steering wheel, centre console and door panels. Before you can start your vehicle, you must enter a unique and reversible PIN number that is up to 20 numbers.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car being started or driven away in the event that a PIN code hasn't been entered first. If you're driving away with the device armed it will display an indicator on your dashboard which will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your vehicle will continue to operate as normal. If you do not enter your PIN in this moment, the indicator will continue to flash and require a new pin code each time you attempt to start your car.