공지사항

Ghost Immobiliser 2

Secures your vehicle from key cloning and prevents thieves from driving your vehicle with original keys. Our latest immobiliser is connected to your vehicle's CAN data network and a unique PIN must be entered in order to start the engine.

Unlike trackers Ghost doesn't transmit any radio frequency signals and can't be detected by diagnostic tools. Ghost does not have LED indicators or buttons that could indicate its presence in your car or van.

Anti-key Cloning

The ghost immobiliser was designed to combat key cloning and hacking. The device connects to the CAN data network in your vehicle and generates an unique pin code push sequence using the buttons from the factory on your dashboard and steering wheel. This stops the thief from being able to start your car. If the incorrect PIN code is entered, your engine isn't able to start, making it impossible for them to drive away with your pride and joy.

A ghost immobiliser is a new technology that is extremely hard for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut off or stolen, the ghost immobiliser is an invisible electronic device that can't be recognized by ordinary thieves because it doesn't emit any radio signals and works silently.

The new generation of immobiliser is capable of protecting your vehicle from a myriad of threats including key-hacking, cloned keys and relay attacks. It can also prevent thieves from adding an additional key or Ghost 2 Immobiliser Fitting Near Me replacing your ECU by ensuring that it does not allow the car to start without entering the correct PIN code before entering.

In contrast to other immobilisers the ghost immobiliser 2 doesn't require any additional remote or key fobs in order to operate. It is able to be deactivated via the driver's mobile using a simple app. This is perfect for when you need to give your car away for valet parking or servicing without the key fobs.

The Autowatch Ghost-II is the latest version of our revolutionary ghost immobiliser. It is designed to be as easy and user-friendly as it is possible, while remaining as secure as ever. This is accomplished by integrating the Ghost-II into the vehicle's data network CAN, which means that there are no additional wires to hide or be easily identified. It also comes with an inbuilt feature that allows users to disable the ghost 2 immobiliser fitting near me (you can try cameradb.review)-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique being used by professional car thieves to steal cars. Thieves have access to your vehicle's OBD port with little more than a laptop, an app, and a few cables, which can be purchased on the internet for less than PS50. Once they have access, they are able to do anything they like, from resetting your vehicle's fault codes, tuning your vehicle, or stealing it in less than a minute.

It can protect your vehicle from being stolen by requiring a unique PIN sequence to be entered along with your key fob before you can start the engine or drive away. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. It is not detected by any scanners for RF or code grabbing. It also has a Service/Valet Mode that allows your vehicle to start without the PIN code.

To make use of an OBD hacking device you need to have an operating system that is capable of reading the OBD protocol, which can be bought for less than PS100 on eBay or Amazon. You will also need an OBD cable that has OBD pins that are connected to the CAN bus, Ghost 2 Immobiliser Fitting Near Me these can be found on Amazon/Ebay for about PS50. The cable has to be spliced into the wiring harness of your car ghost immobiliser, such as the radio wiring harness.

Once the hacker has a connection to your vehicles OBD port, they will send diagnostics requests to the system at high baud rates that can crash the CAN, and prevent systems within your car from working. This could cause the engine to stall and doors to lock, or even the brakes to engage.

No remotes or keys required.

An immobiliser for your car is a great piece of anti theft technology used by billions of modern vehicles all over the world. An aftermarket immobiliser helps protect your vehicle with engine ECU software that prevents cars from starting when an untrue transponder signal is sent.

However, it can be easy for thieves to get around an immobiliser system if they have access to the code to deactivate it. The battery in most key fobs is easily removed by prying it open and a burglar can make use of a simple tool to remove the immobiliser's inner circuit board and replace it with an empty. They'll then be able to start your car.

The TASSA approved ghost immobiliser fitting 2 is an immobiliser that does not require any additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is accomplished through a discrete, silent data loop in CAN that is not detected by diagnostic tools, such as those used by high tech thieves. It does not also use a traditional key-fob with LED indicators, meaning it's not visible at a glance.

It is possible to disable Autowatch's Ghost 2 auto protection at certain times, such as during valet parking or a service job. Ghost CAN immobilisers feature a mode called 'Service Mode that is activated with just a click of a button on your phone. The car is still operated however, its maximum speed will be limited to 36mph for added security.

Contact us today to schedule an appointment to see our workshop. A member of the team will provide a full breakdown of how the system works and provide you with your owner's manuals, installation certificate, Ghost 2 emergency card and security guarantee.

Simple PIN code change process

Ghost is the next-generation device that secures your vehicle without cutting wires or installing key fobs from an aftermarket. It is directly connected to the vehicles CAN data network and a unique PIN code is programmed in it by pressing buttons on your steering wheel & dash. The system stops engine start and can't be bypassed because there are no RF signals emitted from the device. This makes it unrecognisable by sophisticated scanning or code grabbing techniques that modern thieves employ.

The PIN code can be altered to block previous drivers, or even add an override number if you forget the sequence. When installing the installer will show how to do this. The system includes a valet mode feature that allows you to temporarily disable pin input sequences so that your mechanic or garage can service the vehicle without having to know the code. This is great for customers who want to give their vehicle for valet parking / service but don't want to divulge the pin sequence.

Ghost is an individual system that utilizes the buttons on your vehicle to create an unique and interchangeable PIN sequence. This sequence is entered through the smartphone application. No extra LED indicators are thrown out, and your vehicle is secured without chance of being disabled.

Every vehicle is tested

Ghost immobilisers, unlike key fobs that require pressing buttons, is discreetly placed under the steering wheel or dash. Only you will know it's there. The device is connected to your vehicle's CAN data network and a personalised PIN code is programmed using buttons that are already present on your car. The system won't allow your car to start until this code is entered. This means that thieves cannot clone your car's existing keys or gain access to the OBD port to gain access to your vehicle.

Ghost is a great option for all vehicles including electric cars motorhomes, vans, and bicycles. It's also extremely versatile and can be programmed to turn off in various scenarios. For instance, it could be programmed to enter Valet mode when the vehicle is taken to a valet park or servicing company. This means that your car can be operated within a pre-determined 30mph speed limit. The ghost immobiliser will reactivate itself once it is returned to your home.

Another great feature is that the device can be reset to the personalized PIN code at any point. This is great in the event that you lose the code or when the device ceases to function.

The device is also completely unnoticed by anyone who doesn't know what it is. It works by running through existing buttons on the dashboard of your car and on the steering wheel, and uses the data they send to recognise which button has been pressed. This makes it a completely safe and reliable security solution that isn't affected by jamming, RF scanning, or door lock pick sets.