공지사항

Double Glazed Window Repair

Double-glazed windows are usually covered with a warranty, and it's worth checking what it covers. It usually covers issues with window hardware, including hinges and locking mechanisms, within the first 10 years.

Mist in between glass windows can be caused by a breach in the seal, and it's something that requires immediate repair to prevent mould or damp from forming in your house.

Condensation Between the Windows

If condensation forms between windows in your home, it's an indicator that the seal securing the gas that is used to insulate between the panes has failed. This is a serious issue that needs to be addressed immediately, particularly in winter, when humidity levels are at their highest. It could also lead to damage to the sills, sealant, and even mould or mildew.

Ideally, double-glazed windows should never experience condensation between the panes. This can be caused by excessive humidity or a particularly cold snap. This issue is usually resolved without the need to replace an entire window. A professional can drill tiny holes in the window and spray special cleaning solution inside. The moisture is then taken out of the window, and an anti-fogger device can be fitted to prevent any further buildup of moisture in the future.

Condensation can also occur between the windows due to air leakage, or any other cause outside the window. In this scenario it can take a longer time letterbox for upvc door moisture in the window to accumulate, since the air must be warm enough to vaporise the water molecules. In these instances, it may be better to replace the double-glazed windows rather than trying to repair the existing sealed units.

A double-glazed window is constructed up of two or three pieces of insulated glass, held together by a metal frame. The space between the windows is filled with an insulating gas such as Krypton or argon, and glazing then sealed. The seal is responsible for stopping the gas used to insulate from escaping and also prevents air and moisture from getting into the gap.

As windows age, seals may deteriorate allowing moisture to leak between the glass panes. It is crucial to recognize the signs of leaks in the seals, as it means that the double glazing isn't performing as well as it once was. This could lead to poor energy efficiency, higher heating bills, damaged property and the risk of condensation between the windows.

Mist

If you notice condensation on the outside of your windows this is normal and means that your double glazing is functioning properly and retaining the heat inside your home. The condensation is caused by the air outside is warmer than the glass, and reaches the dew point of the window earlier than the air inside. Double glazing of high quality is a fantastic method to accomplish this.

If the condensation is located on the inside of your window then it could be a sign of a ventilation issue in your home. The excess moisture won't go anywhere else and will end in the carpet, window, furniture, and other areas of your home. It is recommended to have this checked by an expert and ensuring that there plenty of fresh air flowing through your home will help prevent it from happening again.

Another reason why mist appears on double-glazed windows is because the seal between two panes of glass is broken. This can be caused by wear and tear, or through the use of chemical cleaning products. If this happens the best solution is to get the windows repaired as soon as possible.

Having your windows professionally repaired will ensure that they remain dry and free of condensation, fogging and misting. It's also less expensive than replacing lock on upvc door them all the way through and will also save you money on your energy costs.

A registered window installer with FENSA will provide you with a cost estimate to repair or replace your double-glazed windows. If your windows are quite old and have been in use for a while you may want to think about changing them to new A-rated energy efficient ones.

It is a good idea to keep copies of any warranties and agreements with your window fitters. This will be very useful in the event that any issues with your windows arise in the future, and you are able to then contact your fitters to resolve the issue. This is better than ignoring the issue, which could lead to more problems for your home.

Open or close with difficulty

It's not just a nuisance when double-glazed windows are difficult to open or close. They could cause more energy costs due to the loss of heat and drafts. It could also be a security issue, particularly if the locks aren't working properly. It is recommended to fix double-glazed windows and doors as soon as you can.

If you have tried opening your window using the most basic methods, such as using an electric screwdriver or tapping the frame using a solid object, the issue could be more serious. The window could have moved and needs to be re-set or there could be a gap between the glass and frames. In either of these scenarios, you must contact a professional double glazing repair expert to make sure that the proper repairs are done and to prevent any further problems.

It isn't uncommon to find upvc door panels window handles and glazing lock mechanisms to become stuck or hard to operate particularly when they're worn and old. It is usually caused by the accumulation of grease or dirt in the handle. This is easily fixed by cleaning it with a uPVC cleanser. If this doesn't work, try tapping the uPVC with the help of a screwdriver. Be careful not to damage either the handle or window handle mechanism.

If this doesn't resolve the issue, then the window might need to be replaced, since it is likely that the hinges aren't more in the proper position, or the locking mechanisms are damaged. In this instance, you must consult a specialist UPVC window repair expert.

David The Window Wizard specialises in all technical aspects of double-glazed window and door repair including fixing a jammed or locked shut double glass window. He has a lot of experience in converting old window mechanisms into modern ones. This can save you money on replacing the entire window. Contact us today for more information or a free quote.

Warping

Double-glazed windows can be an excellent way to save energy in your home. They are made up of two distinct panes with a spacer, air or dense gas between the panes, which creates an airtight seal that keeps cold air out and warm air in. In time, however, these windows may be damaged or broken and require repair. Fortunately, the majority of repairs are easy and can be completed without the expense of replacing upvc window handles the entire window.

Warping is a typical issue when double-glazed windows are installed. This happens when windows start to bow, bend, or twist, which could affect the strength of the window as well as its insulating capabilities. Double-glazed windows must be installed correctly and maintained regularly to avoid this issue.

Get in touch with a professional immediately if you notice that your double-glazed windows are warping. This will help to prevent the situation from getting worse. They can inspect your windows to determine the reason. They will use special tools to fix your issue and make sure that your windows are completely sealed.

Water vapour is a cause of this issue, since it may build up between windows over time. This could be due to various factors including humidity, weather conditions and temperature fluctuations. To address this issue, the specialist will drill a small hole to let the moisture out. They will then apply a cleaning agent to clean the glass and apply sealant to help protect it from moisture in the future.

If windows aren't able to be opened or closed, this could be an indication of a problem with the mechanism or hinges. Before calling a professional to fix the problem, it is recommended to lubricate the parts. This will usually resolve the issue and decrease your need for replacements. If your windows are worn out or don't offer the insulation you require it might be better to replace them.