공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized item from theft. This system is discrete and does not require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique, changeable pin code sequence of up to 20 presses. This will then allow the start-up of your vehicle.

Simple PIN code Change Process

Many homeowners are upgrading their security because of the rise in vehicle theft. There are many different types of security gadgets that are sold aftermarket, from tracking systems to alarms [mouse click the following web site] and immobilisers. They're not all equally effective in protecting your vehicle. A tracking device can aid in finding your car if it is stolen, but it will not stop the crime. Immobilisers, on the other hand, does exactly what is a ghost immobiliser it says on the label: it shuts off your car's engine so that it is unable to be started. The Autowatch Ghost immobiliser is one of the most advanced options on the market, making it almost impossible for alarms thieves to take your vehicle.

Utilizing the buttons already in your car The ghost device generates a unique sequence which must be entered before the car's engine starts. This can be done using the indicator stalk, window or heater buttons. Additionally option, there is an app on mobile that acts as an emergency PIN code override, allowing the driver to operate the car without using the button sequence. This is a great option for those who want to offer your car to valet parking or maintenance. The immobiliser remains in operation.

The ghost 2 immobiliser fitting near me is a very unique and innovative device that works in conjunction with the buttons in your vehicle rather than being a standalone unit. It's not just an effective deterrent for vehicle theft and vandalism, but it can be used to secure any future vehicles you own. This makes it a better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser for sale immobiliser is an advanced security system that guards your vehicle from key cloning, hacking & ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly via the CAN bus to disable the motor. It can be plugged into the vehicle without the need for additional wiring and has been thoroughly tested to ensure that it works with all vehicles. It is also resistant against jamming devices, which are a common technique used by thieves to get around immobilisers.

The advantage of CAN data over traditional systems is that they work silently. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators, but instead uses buttons in your vehicle, like the steering wheel, centre console, or doors, to create unique sequences for disarming. The sequence can be extended to up to 20 presses for additional security. The iPhone app lets you make a single, authorised connection using the pairing code unique to the Ghost and the communication between the two is secured.

The ghost immobiliser installation also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser and begin the engine. The engine will only run when a valid PIN code has been entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can transfer your vehicle to a valet service or for alarms maintenance without having to enter a pin code.

Every vehicle is tested

The Autowatch Ghost is the world's first aftermarket immobiliser for CAN bus that can be connected to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from performing its normal startup routine until you input a custom passcode. The system can be turned on and off by using your smartphone's app without the need for additional wires.

The standard factory immobilisers work by using a transponder that is built into the key. This sends a message to the ECU. The car will begin to start if the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser won't recognize it. This allows the vehicle be stolen and started. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It safeguards your car from hacking, key cloning and even key theft. The only way a thief could steal your vehicle is physically towing it away, and even then they would not be allowed to drive it.

Ghost utilizes the buttons of your vehicle, including the indicator stalk along with the steering wheel, indicator stalk and door panels to create an unique, changeable PIN code sequence that must be entered prior to you are able to use your car. This is done without additional hardware, like key fobs. It can take up 20 to 20 presses. It is also inaccessible to devices for diagnosis and transmits radio frequency signals, meaning thieves cannot make use of sophisticated RF scanners or code grabbing technologies to identify that a system has been installed.

In contrast to the physical devices that prevent theft, such as wheel locks or clamps, Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves and is even more difficult to get rid of than a car alarm that requires disarming using the use of a button sequence. This makes it a great supplement to a GPS tracker, which can help locate your car after it has been taken.

Override of emergency PIN code

You don't have to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow you to start your car without the original keys.

The Ghost immobiliser was specifically designed to prevent this, and give you an extra layer cost of ghost immobiliser security to keep your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and the centre console. This unique PIN must be entered in conjunction with your original key fob to prevent the vehicle from starting. The unique override PIN is on the black card that you will receive after installation and is easy to remember since there are no LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit radio signals. Therefore, it cannot be detected by diagnostic software that can tell the security system you have installed. This makes it an excellent alternative to an alarm.

Contrary to most security systems, which have an engine relay bay, these CANBUS Immobilisers connect with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

It is also possible to connect a separate analogue immobiliser, alarm or tracker with these systems but this must be stated prior to the installation of the device. They are also fully service/valet mode-compatible and a good alternative to a tracker when having your car in for repair at the dealer.

Service/Valet mode

In recent times, there has been a rise in the number of vehicles being stolen with the owners' keys. With the ease of access to key cloning tools and door lock pick sets it is now much easier for thieves to take your prized possessions. To combat this we have launched the Autowatch Ghost immobiliser that prevents your vehicle from being driven despite the fact that your keys have been cloned or your vehicle has been stolen.

It communicates directly with your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent because it does not utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also prevents you from adding the new ECU or key to bypass the system, since only the PIN code allows the engine to be started.

The device is concealed inside your car using existing buttons on the steering wheel, centre console and door panels. Before you can start your car, you need to enter a unique and reversible PIN code up to 20 digits.

This is the first aftermarket CAN-bus immobiliser for the market that is being created. It can prevent your vehicle from being driven or even started if you don't enter a PIN code first. If the device is in armed and you attempt to drive off it will display a warning on your dash, which will flash regularly for around 300m. If you type in your PIN code at this point it will disable the anti-hijack and your car will continue to operate as normal. If you don't enter your PIN in this moment the indicator will continue to flash and require a new PIN code each time you attempt to start your vehicle.