공지사항

Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your valuable possession from theft. This system is discrete and does not require additional key fobs in order to operate.

The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence that can be up to 20 presses. This will allow your vehicle to start.

Simple PIN code change process

Many owners are upgrading their security due to the rising number of vehicle thefts. There are many different types of aftermarket security devices including tracking systems, alarms and immobilisers. However they do not all are equally efficient in protecting your vehicle. While a tracking system may assist in finding your vehicle in the case of theft, it can not prevent the crime from happening in the first place. Immobilisers, on the contrary are exactly what they claim on the label - they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it almost impossible for thieves to steal your vehicle.

Using the existing buttons in your car, the ghost car immobiliser device creates a unique sequence which must be entered before the engine will start. This can be accomplished by using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, which allows the driver to operate their vehicle without the button sequence. This is an excellent option when you wish to donate your car to valet parking or for maintenance. The immobiliser will remain active.

The Ghost is a unique and ingenious device that is used in conjunction with the buttons of your car rather than being a standalone unit. It's not just an effective deterrent for Ghost immobiliser installation vehicle theft and vandalism, but it can also be used on any future vehicles you own. This makes it a more cost of ghost immobiliser-effective option than a traditional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is a high-tech security system that guards your car from key cloning, hacking and ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus to shut down the engine. It can be fitted into the vehicle without any wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant to jamming devices that are the most common method used by thieves to bypass existing immobilisers.

The advantage of using CAN data is that it operates silently in comparison to conventional systems. It cannot be detected using sophisticated RF scanning and code-grabbing technology as well as identified by conventional diagnostic tools. The Autowatch ghost doesn't emit LEDs, but instead utilizes the buttons on your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended up to 20 presses for additional security. The iPhone app permits only one, authenticated connection with the pairing code unique to the Ghost and communication between the two is secured.

The Ghost also stops thieves from stealing a new key or replacing the ECU to bypass the immobiliser and start the engine. The engine will only start only if a valid PIN has been entered. It can also be put into valet/service mode for a temporary operation (with specified parameters, Ghost immobiliser installation such as a 30mph speed limit) so that you can hand your car over to a valet service to be serviced without needing to enter a PIN.

Every vehicle is tested

The Autowatch Ghost is a first-of-its-kind aftermarket immobiliser CANbus. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device intercepts electronic signals to disable your car's system from performing its normal initialization process until you enter an individual passcode. The system can be turned off or on via your smartphone's app, without the need for additional wires.

The standard factory immobilisers function with a transponder which is integrated into the key. It transmits a message to the ECU. The car will start if the correct code is transmitted. However, if the transponder of a different vehicle is used instead, the immobiliser doesn't recognise it. This allows the vehicle be stolen and started. A South African company that is at the forefront of car security systems technology created the Ghost immobiliser. It protects your pride and joy from hacking, key cloning and even key theft. Only by physically towing your vehicle away can thieves take it away and not be able to drive the vehicle.

Ghost 2 immobiliser uses buttons on your vehicle, like the indicator stalk, steering wheel, as well as the door panels, to generate unique PIN codes which must be entered in order to use your car. This is not required to use additional hardware like keys-fobs, and can last up to 20 presses long. It is also inaccessible to equipment for diagnostics and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to identify that the system has been set up.

ghost immobiliser installation - continue reading this.. - is more difficult to get rid of than car alarms, which require disarming by pressing a series of buttons. This makes it a great alternative to an GPS tracking device which can be used to track your vehicle after it's been stolen.

Emergency PIN code override

You do not have to look far on social media to see stories or even videos of vehicles that have been stolen by car thieves employing the latest technology tools available to them. This includes key-cloning devices as well as hacking tools that allow thieves to start the vehicle without your original keys.

The Ghost immobiliser helps combat this issue and offers an additional layer of security to stop your vehicle from being stolen if it is targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel and on the centre console. The unique pin code must be entered along with your original key fob in order to prevent the vehicle from beginning. The unique override pin is on the black card that you will receive following your installation. It is simple to remember because there are no LED indications.

The device is hidden inside the vehicle's wiring and does not emit radio signals, so it isn't able to be detected by modern thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it an excellent alternative to an electronic device for tracking.

Contrary to most security systems that use a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via CAN data bus (brand dependent). This enables them to shut down the vehicle completely by sending a digital block of commands that is sent to both the ECU and the engine.

These systems can also be connected to an analog alarm, immobiliser or tracker. This must be specified prior to installation. They also work with valet and service modes, and are is a great alternative to a tracking device if you bring your vehicle to the dealer for repairs to an electrical problem.

Service/Valet Mode

In recent years, there has been a rise in the number of vehicles stolen without the owner's keys. With the ease of access to key cloning tools and door lock pick sets it is now easier than ever for thieves to take your joy and pride. We've developed the Autowatch Ghost Immobiliser to combat this. It prevents your vehicle from being driven even if your keys have been copied.

It communicates directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely silent since it doesn't use radio frequencies or keys fobs. It cannot be detected using diagnostics or any other hacking device. It also stops you from adding a new ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden within your car, using buttons on the steering wheel, centre console & door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN code that can be as long as 20 digits.

This is the first aftermarket CAN-bus immobiliser for the market that has been developed. It can prevent your vehicle from being driven or started if you don't enter a PIN code first. If you are driving away with the device in motion the indicator will flash on your dashboard that will flash continuously for about 300m. Entering your PIN code will disable the anti-hijack. Your car will continue to function normally. If you don't enter your PIN in this moment, the indicator will continue to flash and require a new pin code each time you attempt to start your vehicle.